Studio Power Supplies | DJ Power Conditioners

Notes: The Heart and SOL of Your Pedalboard

SOL is the ultimate solution for bringing life to a small to medium-sized pedalboard setup, especially if you are using power-hungry pedals. SOL is the smallest mains-powered switch-mode power supply we make at CIOKS (no wall-warts here) and the no-frills design plus massive power will leave you free to focus on your creative spark. Featuring the same 660mA at 9V DC per outlet and four switchable voltages on each outlet as its bigger brother CIOKS DC7, SOL is the most powerful small form-factor power supply available today with a total of 30 watts of DC power available.

Specifcations

Mains input: 100-240V AC universal
Outlet 1-5:
9V DC / 660mA or
12V DC / 500mA or
15V DC / 400mA
or 18V DC / 330mA each
Total output power: max. 30W

What's in the box

9 Flex cables included:
3 x 1030 - Type 1 - 5,5/2,1mm DC plug, centre negative, L-shape, 30cm (black)
2 x 1050 - Type 1 - 5,5/2,1mm DC plug, centre negative, L-shape, 50cm (black)
1 x 2050 - Type 2 - 5,5/2,1mm DC plug, centre positive, L-shape, 50cm (red)
1 x 4050 - Type 4 - 5,5/2,5mm DC plug, centre positive, L-shape, 50cm (green)
1 x 1035 - Split Flex type 1 - 30 & 50cm (black)
1 x 1533 - 3-way daisy chain Flex type 1, 30+30+50cm (black) Included in the box
SOL power supply
AC mains power cord (region specific)
Mounting hardware for Pedaltrain and Templeaudio boards (two screws and one hex-key)
Product manual
Flex Guide
CIOKS sticker sheet

Notes: Protect your equipment and organise your power distribution with this 19" rack mounting unit. The front panel features a digital voltage meter and two LED lamps with dimmer control for illuminating your rack.

Notes: Do you use pedals that don't match the outputs of your power supply? With EBS' new power adapter cables, there's a way to solve most matters.

It sucks when you realize your coolest vintage pedal or latest digital processor-driven unit can't be fed from your pedalboard power supply because they are thirstier or uses different power inputs than your power supply features. At worst, you may even skip bringing your favourite toys to avoid the hassle. However, with the new EBS adaptor cables, you can solve many of these issues easily and save the space that those extra power supplies may occupy.

Need to convert a 2.1 mm plug to 2.5 mm? No problem.
Need more current than you get from one output? No problem.
Need 18 or 24V DC power from 9 and 12V outputs? No problem.
You can even change the polarity from the common Center Negative to Center Positive using one of the new EBS adaptor cables.

Here's how you do it:

To go from 2.1 to 2.5 mm, use the DC1-48 90/0 2.5 adaptor.
Want to change the polarity? Use the DC1-48 90/0 RP adaptor.
To increase the current, use the DC1-48 90/0 PAR and connect two outputs from your power supply. The total current will be the current from both outputs added together.*
To increase the voltage, use the DC1-48 90/0 SER and connect two outputs from your power supply. The total voltage will be the voltage from both outputs added together.*

* IMPORTANT! Requires a power supply with isolated, floating outputs.

Notes: Do you use pedals that don't match the outputs of your power supply? With EBS' new power adapter cables, there's a way to solve most matters.

It sucks when you realize your coolest vintage pedal or latest digital processor-driven unit can't be fed from your pedalboard power supply because they are thirstier or uses different power inputs than your power supply features. At worst, you may even skip bringing your favourite toys to avoid the hassle. However, with the new EBS adapter cables, you can solve many of these issues easily and save the space that those extra power supplies may occupy.

Need to convert a 2.1 mm plug to 2.5 mm? No problem.
Need more current than you get from one output? No problem.
Need 18 or 24V DC power from 9 and 12V outputs? No problem.
You can even change the polarity from the common Centre Negative to Centre Positive using one of the new EBS adapter cables.

Here's how you do it:
To go from 2.1 to 2.5 mm, use the DC1-48 90/0 2.5 adapter.
Want to change the polarity? Use the DC1-48 90/0 RP adapter.
To increase the current, use the DC1-48 90/0 PAR and connect two outputs from your power supply. The total current will be the current from both outputs added together.*
To increase the voltage, use the DC1-48 90/0 SER and connect two outputs from your power supply. The total voltage will be the voltage from both outputs added together.*

* IMPORTANT! Requires a power supply with isolated, floating outputs.

Notes: Do you use pedals that don't match the outputs of your power supply? With EBS new power adapter cables, there's a way to solve most matters.

It sucks when you realize your coolest vintage pedal or latest digital processor-driven unit can't be fed from your pedalboard power supply because they are thirstier or uses different power inputs than your power supply features. At worst, you may even skip bringing your favourite toys to avoid the hassle. However, with the new EBS adapter cables, you can solve many of these issues easily and save the space that those extra power supplies may occupy.

Need to convert a 2.1 mm plug to 2.5 mm? No problem.
Need more current than you get from one output? No problem.
Need 18 or 24V DC power from 9 and 12V outputs? No problem.
You can even change the polarity from the common Center Negative to Center Positive using one of the new EBS adaptor cables.

Here's how you do it:
To go from 2.1 to 2.5 mm, use the DC1-48 90/0 2.5 adaptor.
Want to change the polarity? Use the DC1-48 90/0 RP adaptor.
To increase the current, use the DC1-48 90/0 PAR and connect two outputs from your power supply. The total current will be the current from both outputs added together.*
To increase the voltage, use the DC1-48 90/0 SER and connect two outputs from your power supply. The total voltage will be the voltage from both outputs added together.*

* IMPORTANT! Requires a power supply with isolated, floating outputs.

Notes: Do you use pedals that don't match the outputs of your power supply? With EBS' new power adapter cables, there's a way to solve most matters.

It sucks when you realize your coolest vintage pedal or latest digital processor-driven unit can't be fed from your pedalboard power supply because they are thirstier or uses different power inputs than your power supply features. At worst, you may even skip bringing your favourite toys to avoid the hassle. However, with the new EBS adapter cables, you can solve many of these issues easily and save the space that those extra power supplies may occupy.

Need to convert a 2.1 mm plug to 2.5 mm? No problem.
Need more current than you get from one output? No problem.
Need 18 or 24V DC power from 9 and 12V outputs? No problem.
You can even change the polarity from the common Centre Negative to Centre Positive using one of the new EBS adapter cables.

Here's how you do it:
To go from 2.1 to 2.5 mm, use the DC1-48 90/0 2.5 adapter.
Want to change the polarity? Use the DC1-48 90/0 RP adapter.
To increase the current, use the DC1-48 90/0 PAR and connect two outputs from your power supply. The total current will be the current from both outputs added together.*
To increase the voltage, use the DC1-48 90/0 SER and connect two outputs from your power supply. The total voltage will be the voltage from both outputs added together.*

* IMPORTANT! Requires a power supply with isolated, floating outputs.

Notes: The Electro-Harmonix EHX9.6DC-200 is the player's choice of battery eliminator for many of the world's most popular effects pedals including EHX, Boss, MXR, Ibanez and others. It is a 9.6 Volt DC/200mA linearly regulated power supply with 2.1mm x 5.5mm center negative barrel plug.

Notes: This mains charger has 2 USB sockets, each capable of producing 2100mA output. Ideal for charging tablet computers, smartphones, cameras and other devices.

- Blue LED power ON indicator
- Capable of charging two devices simultaneously

Notes: Mains Power Leads UK - IEC 10A

UK 3 pin plug to IEC C13 female plug 3 cores mains power lead, suitable for connecting power to general electronic equipment up to 2300W (10A).

Max. current: 10A
Max. power: 2300W

Notes: This power adapter provides power to MIDI Solutions products in instances when it is not available or where a large number of items are being chained in series. It has an optically isolated MIDI In, MIDI Thru, and power connection for a 9V (AC or DC) wall adapter. It's possible to power up to 20 MIDI Solutions products from the power adapter's single Thru output. It can also be used in a transmitter/receiver configuration to send MIDI over long distances.

Notes: Macro Power S8 is a pedal power supply with eight output power supply jacks, equipped with vary functions input voltage switch, independent output power jacks, over-current protection and adjustable output. It was designed to meet users needs and offer convenient and pure experiences.

Output power jacks: From left to right
One adjustable voltage output power jack, can choose output voltage from 9V/12V/15V/18V. The output current is 200mA.
Three independent output power jacks, each lines output voltage is 9V, and the output current is 200mA.
Four parallel output power jacks, each lines output voltage is 9V. And support the whole 400mA power needs that the four lines parallel into an independent output power jack.

Notes: Mooer Stage Power Supply PDNT9V2AUK makes the ideal accessory for powering your favourite Mooer guitar effects pedals. Mooer Stage Power Supply PDNT9V2AUK can deliver up to 2 Amps at 9-volt (DC) 2 and features a pedal board style design. PDNT9V2AUK power supply when used with either the 'Power Cable Daisy Chain' PDC-5A (for 5 x pedals) or the PDC-8A (for 8 x pedals), can drive up to eight Mooer FX pedals.

Notes: This high-quality, low-noise power supply adaptor by myVolts has an output of 5V DC and 2A max. Tip: USB A Female.

It's suitable for any device that has a power requirement matching this specification.

If your device has a current requirement lower than 2A that's fine, only the current required by the device is drawn by the device.
So a device that needs, for example, 500mA (or 0.5A) current will be perfectly served by a 1000mA (or 1A) power adaptor.

Specification:

Input:
Input voltage: AC100-240V, 50/60Hz (for worldwide use)
Plug: UK Plug

Output:
Output Voltage: 5V DC
Output Current (Max): 2A


Cable and tip:
Cable length: 0 metres
Tip: USB A Female

Safety and certs:
CE certified: Yes
RoHS certified: Yes
Energy efficiency: Rated 'Energy Star level VI'

Notes: 9V myVolts PSU for use with myVolts 5-way power splitter cable for Korg Volca

Notes: Power Supply Tester

Hot Tip is a power supply tester - it lights up when you connect a working power supply to it.

Uh-oh. Something's not coming on - but is the plug or the device that's dodgy? It's easy to test a plug with the Hot Tip. Just plug the power supply into the wall, then connect it to the Hot Tip - the LED illuminates if there's power, so you'll know if your plug is good or bad.

The female end of Hot Tip accepts a standard 5.5mm outer diameter / 2.1mm inner diameter barrel tip - it's the commonest size, usedon 98% of effects pedals, synths etc.

If you want to test a power adaptor with a different size output, just add the sizes you want to your cart, and we'll send you the parts to fit.

Not sure what size tip you need? Ask us and we'll advise - myVolts has 12 years in the power game and there's nothing we don't know about power.

Power Passthrough

Hot Tip doesn't get in the way of the power - you can power a device through it.

You can power a device without removing the Hot Tip from the PSU tip end - the LED draws almost no power, so you can go ahead and plug the tip end of Hot Tip into your device. That's handy for dark environments, like on a stage - or anytime you want to know and be sure there's power available. (The only works for gear that Hot Tip fits into, 5.5mm outer diameter and 2.1mm inner diameter).

Polarity Indicator LED

Hot Tip illuminates BLUE for centre positive polarity, and RED for centre negative polarity.

Power supplies got mixed up, now you're not sure what polarity which PSU is? Hot Tip contains a bi-colour LED, and lights up BLUE when the connected PSU is polarity centre positive (BLUE C +) and RED when the connected PSU is polarity centre negative (RED C -). It's written on the Hot Tip too, so you don't need to remember it.

Notes: Power up to 5 Korg Volcas from one 9V power adaptor!

Compatible with the Volca Beats, Volca Bass, Volca Keys, Volca Sample, Volca FM and the new Volca Kick.

Option '5-way splitter PLUS PSU' includes MyVolts 9V power supply adaptor, suitable for powering up to 5 Volcas from a mains socket (choose from UK, EU or US plugs).

Option '5-way splitter PLUS USB' includes MyVolts 5V USB to 9V power converter cable, for powering up to 5 Volcas from any USB port - like the USB port in a laptop, a phone charger, or an inexpensive USB power bank!

Option '5-way splitter only' includes only the 5-way splitter, you'll need to supply your own 9V centre positive power adaptor, with 5.5mm outer diameter, 2.1mm inner diameter tip.

Main cable is 1 metre in length

Cable splits into 5 male plug connectors to fit the Volca, and each one is 0.7m in length

MyVolts-branded band keeps the cables tight

Female connector fits a 5.5mm OD and 2.1mm ID tip - it needs a power adaptor with 9V centre positive polarity.

Choose from 5 options:
5-way splitter + USB. Includes 5V to 9V USB converter cable, for powering up to 5 Volcas from any USB port - like the USB port in a laptop, iPhone charger, or an inexpensive USB power bank. Works anywhere in the world!
5-way splitter only
5-way splitter + 9V UK wall power adaptor
5-way splitter + 9V US wall power adaptor
5-way splitter + 9V EU wall power adaptor

Notes: ReVolt 2-battery kit lets you power any device that needs 2 x AAA batteries from a USB port instead.

Kit contains an AAA bridge cable that gives the device a DC power jack input, an AAA dummy battery and a 3V Ripcord USB cable. The ribbon cable that protrudes is robust enough to deliver power to your device, yet flat enough to allow you to easily close the door on the device's battery compartment.

With ReVolt, you'll never need to put batteries into your device again. You can power it whichever way suits you - from a wall phone charger, a USB port on your laptop, a USB powerbank, a USB wall plug, or even from a USB solar cell.

Included in the 2-battery kit:

ReVolt AAA Bridge cable with AAA dummy battery
myVolts 3V Ripcord USB to DC power cable, centre
If you want to power a device that needs 2 x AA batteries, add to your order 2 x ReVolt AAA Dummy Battery

Not sure what you need to power your device? Drop us an email at help@myvolts.co.uk and we'll advise - we've 15 years' experience powering devices and we'd love to solve your power problem, big or small.

Why buy ReVolt?

Adaptable: Use in 1000's of devices: Christmas lights, LED lights, toys, radios, musical instruments, handheld games consoles and thousands more...
Flexible: Use with any USB port.
Mobile: Power your device with a USB power bank for total power freedom.
Global: ReVolt can be safely used anywhere in the world.
Multi-use: Take it out of one device, use it in another.
Non-destructive: Remove it and your device can take standard batteries again, any time.
Economical: Buy once.
Durable: Use 1000's of times.
Environmentally friendly: No consumables to dispose of.
Modular: Get add-ons from the ReVolt system to power different devices.
Assurance: Battery glows red on power connection and DC adapter has two indicator LEDs
No cut-outs: Always know your device will have power.
No leaks: Safely store devices with ReVolt installed

Notes: Revolt - 6 Battery Kit - USB Solution for AAA and AA Battery Devices kit lets you power any device that needs 2 x AAA batteries, or 2 x AA batteries, from a USB port instead.

Kit contains 3 x AAA bridge cables - each gives the device a DC power jack input, 3 x AAA dummy batteries, 6 x AAA to AA adaptors, 2 x Crazy Chain Mini cable and a 3V Ripcord USB cable.

The ribbon cable that protrudes is robust enough to deliver power to your device, yet flat enough to allow you to easily close the door on the device's battery compartment.

Why buy ReVolt?

Adaptable: Use in 1000's of devices: Christmas lights, LED lights, toys, radios, musical instruments, handheld games consoles and thousands more...
Flexible: Use with any USB port.
Mobile: Power your device with a USB power bank for total power freedom.
Global: ReVolt can be safely used anywhere in the world.
Multi-use: Take it out of one device, use it in another.
Non-destructive: Remove it and your device can take standard batteries again, any time.
Economical: Buy once.
Durable: Use 1000's of times.
Environmentally friendly: No consumables to dispose of.
Modular: Get add-ons from the ReVolt system to power different devices.
Assurance: Battery glows red on power connection and DC adapter has two indicator LEDs
No cut-outs: Always know your device will have power.
No leaks: Safely store devices with ReVolt installed
Included in the 6-battery kit:

3 x ReVolt AAA Bridge cable with smart battery
3 x AAA dummy battery: insert into battery compartment alongside the smart battery
3 x AAA to AA adaptors: for powering devices requiring AA batteries
myVolts 3V Ripcord USB to DC power cable: for powering 2-battery devices from a USB port
2 x Crazy Chain Mini cable: daisy-chain up to 4 battery devices, power all from one USB port

Notes: Power up to 5 Roland Boutiques from just one USB plug!

This unique myVolts 5-way power splitter lets you power up to five Roland Boutiques at once, from one USB mains power plug.

It's compatible with all the Roland Boutiques in the range - including the JX-03, VP-03, TB-03, JP-08, JU-06, TR-09 and A-01.

Option '5-way splitter PLUS PSU' includes the 5-way splitter PLUS a myVolts 5V 2000mA USB power supply adaptor, to power from one to five Boutiques.

Option '5-way splitter only' includes only the 5-way splitter, you'll need to supply your own 5V USB power adaptor. Each Roland Boutique draws up to 400mA of current, so if you want to power 5, you need a USB power adaptor capable of delivering 2000mA - like the one we bundle with it.

Get in touch with myVolts if you've any questions about what PSU you need.

Cable features:
Main cable is 1 metre in length
Cable splits into 5 male plug connectors to fit the Boutiques, each one is 0.7m in length
myVolts-branded band keeps the cables tight
Canary yellow cabling makes it easy to spot amongst your other gear
Comes with a myVolts-branded Velcro cable tie

PSU features:
5V DC voltage output
2000mA (or 2A) maximum current output. Each Boutique draws only the current it needs from the max current available.
Worldwide voltage input AC100-240V, 50/60Hz

myVolts loves solving the power problems of creative people like you, so you can forget about them and just get on with the business of making great music.

Get in touch and let us know what you need solved - with more than 10 years in the game, we're obsessed with power!

Notes: The ZEUS Passive Bus Board is used to distribute power to modules coming from either the first generation of ZEUS Powered Bus Board, uZEUS or any other power supply available from other manufacturers. The Passive Bus Board contain both standard quick fit terminals as well as screw terminal block for connecting to power. The quick fit connect are mounted on the bottom side of the bus board to provide clean wiring, while the screw terminal blocks available simultaneously upfront for the most simple and easy connection to power if needed.

Although called Passive, the ZEUS Passive Bus board can produce up to 220ma of +5V supply by its own built in regulator, giving you the confidence that a 5V supply will be there for you in case one of your new modules requires it.

NOTE: This board does not interface with Zeus Studio Bus