Audio Technica

Notes: ***B-STOCK: B-STOCK: Original box damaged and product is in different packaging, but product is in perfect working order***


The ATH-AD2000X open back headphones offer a superlative listening experience. Feather-light and incredibly comfortable, these headphones gives you hours of stunning stereo listening, without fatigue. The large 53mm aperture drives on the headphones are based around Audio-Technica's bobbin-wound CCAW voice coils that regenerate the audio signal with crisp resolution and a deep, balanced bass.

The AD2000X's excel at accurately reproducing classical and audiophile materials. These headphones are designed with lightweight aluminium honeycomb casings, which ensure absolute comfort for long periods of wear. The unique 2-part headband has self-adjusting wings which exert little pressure and absolutely no force on the crown of your head, maintaining an immersive, enjoyable listening experience.

Notes: The AT-HS6 is a universal 1/2"-mount headshell for 4-pin turntable cartridges. It features an ultra-lightweight (9 g) aluminium die-cast body to keep vibration to a minimum and a finger lift to enable precise stylus placement. The headshell is also equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws.

Notes: Bluetooth-equipped version of Audio-Technica's excellent LP120 turntable. Built-in USB connection allows you to hook directly up to a PC for recording vinyl. Great value.

Supplier's Notes:
This version of Audio Technica's critically-acclaimed AT-LP120X USB, now features full wireless Bluetoothr 5.0 connectivity, allowing you to enjoy your favourite vinyl records on the latest Bluetoothr speakers and wireless headphone technology.

The LP120XBT-USB can be plugged into PC, Linux or Mac allowing you to record and convert your vinyl collection to digital tracks, while the fully manual tonearm puts you in control, allowing you to position and set playback wherever you like.

Taking Your Vinyl to the Next Level

Crystal Clear Bluetooth Wireless Audio

Compatible with most Bluetoothr speakers and headphones, the LP120XBT-USB pairs seamlessly to your devices. Simply press the Bluetoothr button, located next to the tonearm, for 4 seconds and connect to your chosen speakers, it's that simple.

You can also connect to Bluetoothr wireless headphones, giving you the flexibility to enjoy your vinyl records without the clutter of wires or having to be near your turntable and music setup. Sink into your comfiest chair and wirelessly enjoy over half a century of Japanese audio engineering and sound excellence.

Bluetooth 5.0 Technology

USB and Analogue Output

Plays 33-1/3 RPM, 45 RPM and 78 RPM Records

AT-VM95E Dual Magnet Phono Cartridge

Multiple Connectivity Options

Plug and Play

The LP120XBT-USB is designed to give you a high-quality listening experience that's easy to enjoy right out of the box. A built-in preamp means the LP120XBT-USB can be plugged directly into your existing speakers, or, with the simple press of a switch, connect wirelessly via Bluetoothr 5.0 to any Bluetooth-compatible speaker, supported home assistant or wireless headphones. Space saving with no external amps, no clutter and no mess; just incredible sound and reliable features designed with over half a century of Japanese audio innovation.

The LP120XBT-USB can also be plugged directly into your computer, for audio playback via your PC speakers or for simple and easy backup and transfer of your vinyl records to playback on your smart devices when on-the-go.

Over 55 Years of Analogue Excellence

Iconic Sound Loved The World Over

The LP120XBT-USB and LP120XUSB line are some of the best-selling turntables around the world, with over 2,500 5-star reviews on Amazon and consistently high feedback from beginners, music lovers, professionals and audiophiles. Audio Technica designed the LP120XBT-USB with you in mind, eliminating the need for expensive amps or convoluted speaker setups.

Based on the iconic DJ turntables and almost 60 years of Japanese audio innovation, the LP120XBT-USB lets you plug directly into your favourite speakers, or enjoy your vinyl collection wirelessly via Bluetoothr to your smart speakers or wireless and truly wireless headphones.

Specifications

Turntable
Type: 3-speed, fully manual operation
Motor: DC servo motor
Drive Method: Direct drive
Speeds: 33-1/3 RPM, 45 RPM, 78 RPM
Turntable Platter: Die-cast aluminum

Notes: Black version of Audio-Technica's entry-level DJ turntable, updated to feature an improved direct-drive motor. Built-in phono preamp and USB audio interface make it easy to connect to any mixer, powered speakers or computer.

Supplier's Notes:
AT-LP120XUSB Direct-Drive Fully Manual Turntable

This update of the AT-LP120-USB turntable features a new DC servo direct-drive motor, along with adjustable dynamic anti-skate control and selectable phono preamplifier. The fully manual turntable plays 33-1/3, 45, and 78 RPM records and is equipped with a USB output that allows direct connection to your computer. Just download the free Mac- and PC-compatible Audacity recording software (or software of your choice) and start converting your records to digital audio files.

But in addition to the USB output, the turntable also comes with a detachable dual RCA output cable and is equipped with a built-in selectable phono preamp so you can connect directly to your home stereo, whether it has a dedicated phono input or not. The turntable features an S-shaped tonearm with adjustable tracking force and an AT-HS6 universal 1/2"-mount headshell with an AT-VM95E Dual Magnet phono cartridge.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application. Additional features include a die-cast aluminium platter with felt mat; a start/stop button; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8% or +/-16% adjustment ranges; a stroboscopic platter with speed indicator; a removable plug-type stylus target light; external power supply; and a removable hinged dust cover.

Analogue or USB Connection

Next-Generation Analogue/USB Turntable

An update of the critically acclaimed AT-LP120-USB, this turntable features a new DC servo direct-drive motor, along with adjustable dynamic anti-skate control and selectable phono preamplifier.

Plays 33-1/3 RPM, 45 RPM and 78 RPM Records

USB and Analogue Output

Built-in Switchable Phono Pre-Amplifier

AT-VM95E Dual Magnet Phono Cartridge

Taking Your Vinyl to the Next Level

High-Fidelity Home Audio

Whether using with your home stereo system or your computer, the AT-LP120XUSB's professional controls give you the power to shape your high-fidelity listening experience.

Cartridge Assembly Line Circa 1962

Half a Century of Stunning Analogue Sound

Audio Technica was started in Tokyo in 1962, designing and manufacturing high-performance phono cartridges. That half-century's worth of analogue expertise goes into every turntable produced, ensuring you get the best listening experience from your vinyl.

Specifications

Turntable

Type: 3-speed, fully manual operation
Motor: DC servo motor
Drive Method: Direct drive
Speeds: 33-1/3 RPM, 45 RPM, 78 RPM
Turntable Platter: Die-cast aluminum
Starting Torque: >1.0 kgf.cm
Braking System: Electronic brake
Wow and Flutter: <0.2% (WTD) @ 3 kHz (JIS)
Signal-to-Noise Ratio: >50 dB
Output Level: Pre-amp "PHONO": 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp "LINE": 240 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized
USB Function: A/D, D/A - 16-bit/44.1 kHz or 48 kHz USB selectable;
Computer interface: USB 1.1 Compliant Windows 7 or above, or MAC OS X or above
Power Supply Requirements: 100 to 240 V, 50/60 Hz, 1.5A Max.
Dimensions: 452.0 mm (17.80") W x 352.0 mm (13.86") D x 141.6 mm (5.57") H
Weight: 8 kg (17.6 lbs.), without dust cover
Accessories Included: AT-VM95E phono cartridge; AT-HS6 headshell; 1.9 m (6.2') USB cable; dual RCA (male) to dual RCA (male) cable with ground wire; counterweight; felt mat; dust cover; 45 RPM adapter; plug-type stylus target light

Notes: Updated version of Audio-Technica's excellent entry-level DJ turntable, featuring an improved direct-drive motor. Built-in phono preamp and USB audio interface make it easy to connect to any amplifier, powered speakers or computer.

Supplier's Notes:
AT-LP120XUSB Direct-Drive Fully Manual Turntable

This update of the AT-LP120-USB turntable features a new DC servo direct-drive motor, along with adjustable dynamic anti-skate control and selectable phono preamplifier. The fully manual turntable plays 33-1/3, 45, and 78 RPM records and is equipped with a USB output that allows direct connection to your computer. Just download the free Mac- and PC-compatible Audacity recording software (or software of your choice) and start converting your records to digital audio files.

But in addition to the USB output, the turntable also comes with a detachable dual RCA output cable and is equipped with a built-in selectable phono preamp so you can connect directly to your home stereo, whether it has a dedicated phono input or not. The turntable features an S-shaped tonearm with adjustable tracking force and an AT-HS6 universal 1/2"-mount headshell with an AT-VM95E Dual Magnet phono cartridge.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application. Additional features include a die-cast aluminium platter with felt mat; a start/stop button; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8% or +/-16% adjustment ranges; a stroboscopic platter with speed indicator; a removable plug-type stylus target light; external power supply; and a removable hinged dust cover.

Analogue or USB Connection

Next-Generation Analogue/USB Turntable

An update of the critically acclaimed AT-LP120-USB, this turntable features a new DC servo direct-drive motor, along with adjustable dynamic anti-skate control and selectable phono preamplifier.

Plays 33-1/3 RPM, 45 RPM and 78 RPM Records

USB and Analogue Output

Built-in Switchable Phono Pre-Amplifier

AT-VM95E Dual Magnet Phono Cartridge

Taking Your Vinyl to the Next Level

High-Fidelity Home Audio

Whether using with your home stereo system or your computer, the AT-LP120XUSB's professional controls give you the power to shape your high-fidelity listening experience.

Cartridge Assembly Line Circa 1962

Half a Century of Stunning Analogue Sound

Audio Technica was started in Tokyo in 1962, designing and manufacturing high-performance phono cartridges. That half-century's worth of analogue expertise goes into every turntable produced, ensuring you get the best listening experience from your vinyl.

Specifications

Turntable

Type: 3-speed, fully manual operation
Motor: DC servo motor
Drive Method: Direct drive
Speeds: 33-1/3 RPM, 45 RPM, 78 RPM
Turntable Platter: Die-cast aluminum
Starting Torque: >1.0 kgf.cm
Braking System: Electronic brake
Wow and Flutter: <0.2% (WTD) @ 3 kHz (JIS)
Signal-to-Noise Ratio: >50 dB
Output Level: Pre-amp "PHONO": 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp "LINE": 240 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized
USB Function: A/D, D/A - 16-bit/44.1 kHz or 48 kHz USB selectable;
Computer interface: USB 1.1 Compliant Windows 7 or above, or MAC OS X or above
Power Supply Requirements: 100 to 240 V, 50/60 Hz, 1.5A Max.
Dimensions: 452.0 mm (17.80") W x 352.0 mm (13.86") D x 141.6 mm (5.57") H
Weight: 8 kg (17.6 lbs.), without dust cover
Accessories Included: AT-VM95E phono cartridge; AT-HS6 headshell; 1.9 m (6.2') USB cable; dual RCA (male) to dual RCA (male) cable with ground wire; counterweight; felt mat; dust cover; 45 RPM adapter; plug-type stylus target light

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Updated version of Audio-Technica's excellent entry-level DJ turntable, featuring an improved direct-drive motor. Built-in phono preamp and USB audio interface make it easy to connect to any amplifier, powered speakers or computer.

Supplier's Notes:
AT-LP120XUSB Direct-Drive Fully Manual Turntable

This update of the AT-LP120-USB turntable features a new DC servo direct-drive motor, along with adjustable dynamic anti-skate control and selectable phono preamplifier. The fully manual turntable plays 33-1/3, 45, and 78 RPM records and is equipped with a USB output that allows direct connection to your computer. Just download the free Mac- and PC-compatible Audacity recording software (or software of your choice) and start converting your records to digital audio files.

But in addition to the USB output, the turntable also comes with a detachable dual RCA output cable and is equipped with a built-in selectable phono preamp so you can connect directly to your home stereo, whether it has a dedicated phono input or not. The turntable features an S-shaped tonearm with adjustable tracking force and an AT-HS6 universal 1/2"-mount headshell with an AT-VM95E Dual Magnet phono cartridge.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application. Additional features include a die-cast aluminium platter with felt mat; a start/stop button; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8% or +/-16% adjustment ranges; a stroboscopic platter with speed indicator; a removable plug-type stylus target light; external power supply; and a removable hinged dust cover.

Analogue or USB Connection

Next-Generation Analogue/USB Turntable

An update of the critically acclaimed AT-LP120-USB, this turntable features a new DC servo direct-drive motor, along with adjustable dynamic anti-skate control and selectable phono preamplifier.

Plays 33-1/3 RPM, 45 RPM and 78 RPM Records

USB and Analogue Output

Built-in Switchable Phono Pre-Amplifier

AT-VM95E Dual Magnet Phono Cartridge

Taking Your Vinyl to the Next Level

High-Fidelity Home Audio

Whether using with your home stereo system or your computer, the AT-LP120XUSB's professional controls give you the power to shape your high-fidelity listening experience.

Cartridge Assembly Line Circa 1962

Half a Century of Stunning Analogue Sound

Audio Technica was started in Tokyo in 1962, designing and manufacturing high-performance phono cartridges. That half-century's worth of analogue expertise goes into every turntable produced, ensuring you get the best listening experience from your vinyl.

Specifications

Turntable

Type: 3-speed, fully manual operation
Motor: DC servo motor
Drive Method: Direct drive
Speeds: 33-1/3 RPM, 45 RPM, 78 RPM
Turntable Platter: Die-cast aluminum
Starting Torque: >1.0 kgf.cm
Braking System: Electronic brake
Wow and Flutter: <0.2% (WTD) @ 3 kHz (JIS)
Signal-to-Noise Ratio: >50 dB
Output Level: Pre-amp "PHONO": 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp "LINE": 240 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized
USB Function: A/D, D/A - 16-bit/44.1 kHz or 48 kHz USB selectable;
Computer interface: USB 1.1 Compliant Windows 7 or above, or MAC OS X or above
Power Supply Requirements: 100 to 240 V, 50/60 Hz, 1.5A Max.
Dimensions: 452.0 mm (17.80") W x 352.0 mm (13.86") D x 141.6 mm (5.57") H
Weight: 8 kg (17.6 lbs.), without dust cover
Accessories Included: AT-VM95E phono cartridge; AT-HS6 headshell; 1.9 m (6.2') USB cable; dual RCA (male) to dual RCA (male) cable with ground wire; counterweight; felt mat; dust cover; 45 RPM adapter; plug-type stylus target light

Notes: One of our favourite DJ turntables. Clearly inspired by the classic Technics SL-1200 but clocking in at a more affordable price point. Direct drive motor, decent build quality and a few nice bonus features like adjustable pitch range.

Supplier notes:
The AT-LP140XP fully manual professional DJ turntable features a high-torque direct-drive motor and anti-resonant, mass-damped, die-cast aluminium platter to ensure stable, on-axis rotation at 33-1/3, 45, and 78 RPM. It is equipped with an S-shaped tonearm with height adjustment, adjustable tracking force (counterweight) and adjustable dynamic anti-skate control.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the durable, high-output AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus included with the turntable. It comes pre-mounted to an AT-HS6 universal 1/2"-mount headshell.

Designed to connect to components with a dedicated phono input, the turntable comes with a detachable dual RCA output cable and supplies a strong 5.5 mV output.

Additional professional features include a start/stop button; forward and reverse play; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8%, +/-16%, and +/-24% adjustment ranges; a stroboscopic platter with speed indicator; a retractable plug-type stylus target light; and a removable hinged dust cover.

Notes: One of our favourite DJ turntables. Clearly inspired by the classic Technics SL-1200 but clocking in at a more affordable price point. Direct drive motor, decent build quality and a few nice bonus features like adjustable pitch range.

Supplier's notes:
The AT-LP140XP fully manual professional DJ turntable features a high-torque direct-drive motor and anti-resonant, mass-damped, die-cast aluminium platter to ensure stable, on-axis rotation at 33-1/3, 45, and 78 RPM. It is equipped with an S-shaped tonearm with height adjustment, adjustable tracking force (counterweight) and adjustable dynamic anti-skate control.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the durable, high-output AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus included with the turntable. It comes pre-mounted to an AT-HS6 universal 1/2"-mount headshell.

Designed to connect to components with a dedicated phono input, the turntable comes with a detachable dual RCA output cable and supplies a strong 5.5 mV output.

Additional professional features include a start/stop button; forward and reverse play; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8%, +/-16%, and +/-24% adjustment ranges; a stroboscopic platter with speed indicator; a retractable plug-type stylus target light; and a removable hinged dust cover.

Notes: USB version of the excellent value LP60 turntable, featuring a built-in audio interface to help you connect to a computer and digitise your vinyl. Fully automatic design includes line output to connect to speakers.

Supplier's Notes:
With the AT-LP60XUSB fully automatic belt-drive turntable you can experience your vinyl's high-fidelity audio directly or convert it to digital. The AT-LP60XUSB plays both 33-1/3 and 45 RPM records and is equipped with a USB output that allows direct connection to your computer.

Just download the free Mac- and PC-compatible Audacity recording software (or software of your choice) and start converting your records to digital audio files. In addition to the USB output, the turntable is also equipped with a detachable RCA output cable (3.5 mm male to dual RCA male) and a built-in switchable phono preamp so you can connect directly to your home stereo, powered speakers, computer and other components, whether they have a dedicated phono input or not.

This updated version of the AT-LP60-USB features a redesigned tonearm base and headshell to improve tracking and reduce resonance. Noise is further reduced by the inclusion of an AC adapter that moves the AC/DC conversion outside of the chassis where its impact on the signal chain is limited.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the AT-LP60XUSB's Dual Magnet cartridge with replaceable stylus. The cartridge is integrated into the headshell for assured performance and ease of setup.

The turntable comes with a 45 RPM adapter and a removable hinged dust cover.

Specifications

Turntable

Type: fully automatic
Motor: DC servo-controlled
Drive Method: Belt-drive
Speeds: 33-1/3 RPM, 45 RPM
Turntable Platter: Aluminium

Notes: The ideal step up from entry-level turntables, the LPW30TK is a fully manual belt-drive model with a smart teak veneered plinth. Includes built-in phono pre-amp and quality phono cartridge.

Supplier's Notes:
The AT-LPW30TK two-speed turntable has been engineered to deliver the refined sound you expect from our Japanese audio experts. The wood veneer plinth with a teak finish limits low-frequency acoustic feedback and offers sophisticated styling, with clean and minimalist aesthetics. The straight aluminium tonearm and built-in phono preamplifier provide optimal high-fidelity audio reproduction in a user-friendly, fully-manual belt-drive turntable.

Specifications:

Type: 2-speed, fully manual operation
Motor: DC servo motor
Drive Method: Belt-drive
Speeds: 33 1/3 RPM, 45 RPM
Turntable Platter: Die-cast aluminum

Notes: AT-VM95C VM95 series Conical stereo cartridge - Aluminium cantilever, 4.0mV output voltage, Compatible body with all VM95 Series stylus assemblies and Replacement for AT91, AT91R and CN5625AL

VM95 series Conical stereo cartridge
The AT-VM95C, the new Audio-Technica entry model Conical cartridge will replace the legendary AT90 Series models such as AT91, AT91R and CN5625AL

Also the AT-VM95C is a “budget” cartridge featuring a conical stylus, the compatibility in the range will allow to upgrade with any of the 4 other LP styli of the Series such as Elliptical, Elliptical Nude, Microlinear and Shibata.

Aluminium cantilever
4.0mV output voltage
Compatible body with all VM95 Series stylus assemblies
Replacement for AT91, AT91R and CN5625AL
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VMN95C

AT-VMN95E

AT-VMN95EN

AT-VMN95ML

AT-VMN95SH

AT-VMN95SP

AT-VM9E Series compatibility with the AT-XP Series DJ Cartridges
The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.
ATN-XP7

ATN-XP5

ATN-XP3

Conical Bonded Stylus
The benefit of conical styli, even if the cartridge is "lean

Cartridge & Stylus
Frequency Response 20 - 20,000 Hz
Channel Separation 18 dB (1 kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8 to 2.2g (2.0g standard)
Stylus Construction Bonded Round Shank

Notes: AT-VM95C/H VM95 series Conical stereo cartridge on AT-HS6 Headshell - AT-VM95C mounted on AT-HS6BK headshell, The total set weight is 15.5g and Assembled and tested in the Audio-Technica Factory in Fukui-Japan.

VM95 series Conical stereo cartridge on AT-HS6 Headshell
AT-VM95C mounted on AT-HS6BK headshell
The total set weight is 15.5g
Assembled and tested in the Audio-Technica Factory in Fukui-Japan
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VMN95C

AT-VMN95E

AT-VMN95EN

AT-VMN95ML

AT-VMN95SH

AT-VMN95SP

Conical Bonded Stylus
The benefit of conical styli, even if the cartridge is "lean

Cartridge & Stylus
Frequency Response 20 - 20,000 Hz
Channel Separation 18 dB (1 kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8 to 2.2g (2.0g standard)
Stylus Construction Bonded Round Shank

Notes: AT-VM95E/H VM95 series Elliptical stereo cartridge on AT-HS6 Headshell - AT-VM95E mounted on AT-HS6BK headshell, The total set weight is 15.5g and Assembled and tested in the Audio-Technica Factory in Fukui-Japan

VM95 series Elliptical stereo cartridge on AT-HS6 Headshell
AT-VM95E mounted on AT-HS6BK headshell
The total set weight is 15.5g
Assembled and tested in the Audio-Technica Factory in Fukui-Japan
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VMN95C

AT-VMN95E

AT-VMN95EN

AT-VMN95ML

AT-VMN95SH

AT-VMN95SP

Elliptical Bonded Stylus
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Preassembled With AT-HS6BK Headshell
The AT-VM95E cartridge is fitted onto the 9g aluminiumdie cast body headshell

Cartridge & Stylus
Frequency Response 20 - 22,000 Hz
Channel Separation 20 dB (1 kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8 to 2.2g (2.0g standard)
Stylus Construction Bonded Round Shank

Notes: AT-VM95EN/H VM95 series Elliptical Nude stereo cartridge on AT-HS6 - AT-VM95EN mounted on AT-HS6BK headshell, The total set weight is 15.5g and Assembled and tested in the Audio-Technica Factory in Fukui-Japan

VM95 series Elliptical Nude stereo cartridge on AT-HS6
AT-VM95EN mounted on AT-HS6BK headshell
The total set weight is 15.5g
Assembled and tested in the Audio-Technica Factory in Fukui-Japan
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VMN95C

AT-VMN95E

AT-VMN95EN

AT-VMN95ML

AT-VMN95SH

AT-VMN95SP

Elliptical Nude Stylus
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Preassembled With AT-HS6BK Headshell
The AT-VM95C cartridge is fitted onto the 9g aluminium die cast body headshell

Cartridge & Stylus
Frequency Response 20 - 23,000 Hz
Channel Separation 22 dB (1 kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8 to 2.2g (2.0g standard)
Stylus Construction Nude Round Shank

Notes: The AT-XP series cartridges provide a high quality sound for vinyl DJ's. Offering all the features of a DJ cartridge, but with a Hi-fi sound, the XP series are perfect for the stage and club DJ who prioritises sound quality.

- Audiophile DJ cartridge equipped with a conical stylus
- VM dual magnet construction
- Durable robust design for high-quality specialist DJ playback
- Signal output level and output impedance characteristics suited for professional DJ applications
- Carbon fibre-reinforced ABS cantilever and nylon wire suspension ensure precise tracking
- Compatible with the replacement styli ATN-XP5 and ATN-XP7 for an upgrade
- Configuration as single cartridge (AT-XP3), Replacement Stylus (ATN-XP3) and as headshell bundle together with the headshell AT-HS6BK available (AT-XP3/H)

Notes: The AT-XP5 is specially designed for the needs of DJs. This cartridge features a highly-rigid polyphenylene sulphide (PPS)/glass fibre body and a tracking force of 2 to 4 grams. It also offers a powerful output level of 5.5 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Plus, the cartridge is specifically designed to provide maximum visibility of the stylus tip.

Notes: The AT-XP series cartridges provide a high-quality sound for vinyl DJ's. Offering all of the features of a DJ cartridge, but with a Hi-fi sound, the XP series are perfect for the stage and club DJ who prioritises sound quality.

- Audiophile DJ cartridge AT-XP5 pre-mounted on the AT-HS6BK headshell
- VM dual magnet construction
- Durable robust design for high-quality specialist DJ playback
- Carbon fibre-reinforced ABS cantilever and nylon wire suspension ensure precise tracking
- Compatible with the replacement styli ATN-XP3 and ATN-XP7
- Configuration as single cartridge (AT-XP5), Replacement Stylus (ATN-XP5) and as headshell bundle together with the headshell AT-HS6BK available (AT-XP5/H)

Notes: The AT-XP series cartridges provide a high-quality sound for vinyl DJ's. Offering all of the features of a DJ cartridge, but with a Hi-fi sound, the XP series are perfect for the stage and club DJ who prioritises sound quality.

- Audiophile DJ cartridge AT-XP7 pre-mounted on the AT-HS6BK headshell
- VM dual magnet construction
- Durable robust design for high-quality specialist DJ playback
- Tapered aluminium cantilever providing outstanding rigidity
- Compatible with the replacement styli ATN-XP3 and ATN-XP5 as well
- Configuration with single cartridge (AT-XP7). The replacement stylus (ATN-XP7) and a headshell bundle, consisting of the replacement stylus and the headshell AT-HS6BK (AT-XP7/H) are available separately

Notes: Based on the iconic and critically acclaimed AT2020, the AT2020USB+ cardioid condenser microphone brings affordable, professional quality into the homes of podcasters, musicians and voiceover artists alike. Plug and Play compatible and engineered for crisp detail, the AT2020USB+ has been a firm favourite amongst creators for many years.

Equipped with a USB output, the AT2020 USB+ is designed for digitally capturing music or any acoustic audio source using your favorite recording software. The microphone offers the critically acclaimed, award winning sound of the AT2020, with studio quality articulation and intelligibility perfect for singer/songwriters, podcasters, voice over artists, field recorders, and home studio recorders.

The AT2020 USB+ features a built in headphone jack with volume control that allows you to directly monitor your microphone signal with no delay. It also offers mix control that blends microphone and pre recorded audio. The microphone's cardioid pickup pattern delivers excellent off axis rejection, while its A/D converter with a 16 bit, 44.1/48 KHz sampling rate ensures extremely articulate sound reproduction.

Audio Technica's state of the art design and manufacturing techniques ensure that the microphone complies with the company's renowned consistency and reliability standards.

Specifications

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 20 - 20,000 Hz
Power Requirements: USB Power (5V DC)
Bit Depth: 16 bit
Sample Rate: 44.1/48 kHz
Volume Control: Mix control; Headphone volume control
Weight: 386g
Dimensions: 6.38" (162.0 mm) long, 2.05" (52.0 mm) maximum body diameter
Output Connector: USB-type
Headphone Output Power: 130 mW (at 1 kHz, 10% T.H.D., 32 ohm load)
Headphone Jack: 3.5 mm (1/8") TRS (stereo)
Accessories Included: Pivoting stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch; tripod desk stand; 10' (3.1 m) USB cable

Notes: The AT2040USB is an ideal microphone for creators, featuring a dynamic design for excellent voice capture with added USB functionality.

Combining the broadcast-quality performance of the AT2040 dynamic podcast microphone with plug-and-play USB functionality makes this the ideal microphone for podcasters, streamers, and other content creators to achieve professional results.

When live streaming, outstanding sound is just as important as interesting content and high-quality video. The AT2040USB microphone ensures a natural frequency response with rich, powerful lows and crystal-clear studio sound, making it easy for YouTubers looking to increase their viewership and streamers wanting to gain a professional edge.

This dynamic microphone also touts its quality with a highly directional, hypercardioid pickup pattern that helps eliminate common ambient noise, like the hum of a computer fan. With a narrower pickup angle than a cardioid design, the AT2040USB provides focused vocal capture, which is ideal and super effective for creators and gamers who stream and chat with followers.

Additionally, the microphone's robust metal body includes an integrated shock mount to minimize unwanted noise and vibration, while its internal pop filter protects against harsh spoken sounds. For added noise, shock, and vibration cancellation that may be transmitted through a mic stand, boom, or mount, users can purchase the AT8458a shock mount separately.

Highly Directional Voice Capture - Vocal Clarity

Hypercardioid polar pattern provides maximum vocal isolation for professional-quality sound.

Mute Button - Simple to Silence

A simple touch of the capacitive mute button immediately silences the microphone. The mic's LED ring changes from blue to red indicating that the audio is muted.

Headphone Output - Zero Latency Monitoring

A headphone jack with volume control allows you to monitor audio directly from the microphone, while the mix control allows you to blend your microphone signal with computer audio.

Headphone Output - Clean Articulation

The AT2040USB's multistage foam mesh windscreen includes a nonwoven filter to allow close-up use without annoying pops.

Integrated Shock Mount and Low-cut Filter - Quiet, Professional Performance

The mic features a specially designed, integrated shock mount that tames any noise, shock and vibration that might be transmitted through a mic stand, boom or mount. The low-cut filter eliminates low-frequency sound for additional reduction of vibration and surrounding environmental noise.
Features
Dynamic broadcast microphone with plug-and-play USB functionality is perfect for podcasters, streamers, and other content creators
Hypercardioid pickup focuses on your voice and minimizes room noises and echo
Multistage foam mesh windscreen provides superior internal pop protection
Integrated shock mount tames noise, shock and vibration transmitted through mic stands, booms and mounts
Built-in headphone jack with high-output amplifier and volume control enables real-time monitoring with excellent sound quality
Mix control allows the microphone signal to be blended with pre-recorded audio
Silent soft-touch mute button provides convenient, reliable muting at the microphone
High-resolution AD convertor with 24-Bit/96 kHz sampling rate for extremely clear, natural sound reproduction
Switchable low-cut filter controls unwanted low-frequency sound
Two-state LED indicator ring lights blue when mic is powered on and
lights red when it is muted
Professional-grade metal body for lasting durability
Includes mounting clamp and USB-C to USB-A cable (with USB-A to
USB-C adapter)

Specifications
USB 2.0 compliant
System requirements:
OS Windows 10, Windows 11
macOS Catalina, macOS Big Sur, macOS Monterey, macOS Ventura (Please check the product's web page for the latest information)
Element: Dynamic
Polar pattern: Hypercardioid
Frequency response : 80-16,000 Hz
Low cut: 80 Hz, 18 dB/octave
Power supply: USB power (5 VDC)
Bit depth: 16 bit/24 bit
Supported sampling rates: 44.1 kHz/48 kHz/88.2 kHz/96 kHz
Controls: Headphone level control, Mix control, Low cut, Mute
Dimensions: 145.3 mm (5.7") long, 52 mm (2.0") maximum body diameter
Weight: About 600 g (21 oz)
Gross Package Dimensions: 9.0 x 24.4 x 24.6 cm
Gross Package weight: 978.6 g
COO: Taiwan
Output connector: USB Type-C
Headphone output: 77 mW (at 1 kHz, 1% T.H.D., 32 ohms)
Headphone jack: 3.5 mm (1/8") stereo mini-jack

Included accessories
AT8487 mounting clamp
5/8"-27 to 3/8"-16 threaded adapter
USB cable (about 2.0 m (6.6'), USB Type-C to USB Type-A)
USB conversion adapter (USB-Type-A to USB Type-C)

Notes: The custom designed AT8175 microphone pop filter clips onto the front of the mic to provide added protection against plosives. Designed to fit 20 Series vocal microphones.
The AT8175 is compatible with the following microphone models: AT2020, AT2020USB-X, AT2035, AT2050, AT2020USB+

Features

Microphone pop filter clips onto the front of the mic.
Perforated steel mesh design allows for passage of clear speech and adds protection against plosives.
Compatible with the following 20 Series vocal microphones: AT2020, AT2020USB-X, AT2035, AT2050, AT2020USB+.

Specifications

Dimensions 74 mm (2.9") × 63 mm (2.5") × 88 mm (3.5") (W × D × H)
Weight 31.1 g (1.1 oz)

Notes: P-mount Dual Moving Magnet cartridge with conical bonded stylus

AT81CP P-mount Dual Moving Magnet cartridge with conical bonded stylus. 0.6 mil conical stylus, Bonded round shank diamond and Carbon Fibre Reinforced ABS cantilever

The AT81CP allows owners of Technics, Hitachi, Pioneer and similar linear tracking turntables with T4P plug-in connectors to enjoy the high-fidelity sound that only Audio-Technica can offer.

Designed specifically for the linear format, the AT81CP features Audio-Technica's unique dual moving magnet construction. The dual magnet system is combined with the para-toroidal coil construction to assure an excellent sonic clarity and wide channel separation.

Specifications

Cartridge & Stylus

Frequency Response: 20 - 20,000 Hz
Channel Separation: 18 dB at 1kHz
Vertical Tracking Angle: 20 degrees
Stylus Construction: Bonded Round Shank
Recommended Load Impedance: 47,000 ohms
Coil Inductance: 400mH (1 kHz)
Output Voltage: 3.5 mV (mV at 1 kHz, 5 cm/sec)
Output Channel Balance: 2.5 dB
Stylus Shape: Conical
Cantilever : Carbon Fibre Reinforced ABS
Mounting: P-mount
Dimensions: H10.0×W15.3×D35.1 mm
Recommended Load Capacitance: 100-200 pF
Replacement Stylus: ATN81CP
Stylus Size: 0.6 mil
Type: Dual Magnet
Weight: 6.0g

Notes: Attach your favorite microphone to this professional-quality boom arm to add versatility to your recording or streaming setup and free up space. Includes four USB cable clips, four XLR cable clips, and a table clamp.

Features:

Table-mount boom arm with 5/8"-27 thread adds versatility to a recording or streaming setup

Full 360- rotation

Includes USB cable clip (x 4), XLR cable clip (x 4), and table clamp

Notes: The ATH-SPORT50BT wireless in-ear headphones pair great sound with great fit and freedom of movement to fuel your workout wherever it takes you. The comfortable ear-hook design keeps the headphones securely in place so the powerful 9 mm drivers can deliver all the crystal-clear audio received through the Bluetooth wireless signal. And with a mic and controls conveniently built into the left housing, it's easy to handle calls and control your music on the run.

The fit and sound characteristics can be adjusted further through the interchange of two types of included eartips: standard silicone eartips (XS/S/M/L) that provide outstanding sound isolation and ridged eartips (S/M/L) that allow some ambient noise to seep in for safer use outdoors. The internal lithium polymer rechargeable battery delivers six hours of continuous use and recharges easily with the included 30 cm (1') USB charging cable. The headphones are also IPX5 Waterproof Certified, so you can wash them off when your workout is through.

Notes: Superb value for money with this hugely popular model from the ever-reliable Audio-Technica. A little smaller and a lot cheaper than the excellent M50X model, but with similarly clear, balanced performance.

Supplier's Notes:

The high-performance ATH-M40x professional headphones are tuned flat for incredibly accurate audio monitoring across an extended frequency range.

Your studio experience is enhanced with superior sound isolation and swiveling earcups for convenient one-ear monitoring. Engineered with pro-grade materials and robust construction, the M40x excels in professional studio tracking and mixing, as well as DJ monitoring.

This product includes interchangeable coiled and straight cables, a carry pouch and a 1/4" jack adapter for universal compatibility.

Notes: There are lots of good reasons why these are some of the most popular studio headphones on the market. Clear sound, comfortable and good isolation. Perennial favourites from Japanese headphone specialists Audio-Technica.

Supplier's notes:
This is the most critically acclaimed model in the M-Series line, praised by top audio engineers and pro audio reviewers year after year.

The ATH-M50x features the same coveted sonic signature, now with refined earpads and detachable cables.

From large-aperture drivers to sound isolating earcups and robust construction, the M50x provides an unmatched experience for the most critical audio professionals.

This product includes interchangeable coiled and straight cables, a carry pouch and a 1/4" jack adapter for universal compatibility.

Notes: The ATH-M50xBT2 is the second generation of the critically acclaimed M-Series wireless over-ear headphones. These headphones feature 45 mm large aperture drivers in a wireless design, so listeners will enjoy the same sonic signature of the legendary ATH-M50x studio headphones. With this update, Audio Technica also introduced several noticeable enhancements, such as improved vocal pickup for better call quality, an updated USB-C connection, and multipoint pairing mode.

So, whether you're looking for high-fidelity audio for your commute to work, conference call setup, or just relaxing and enjoying the music, the ATH-M50xBT2 lets you go wireless whenever you need it.

Building on the acclaimed sonic signature of the ATH-M50x headphones, the ATH-M50xBT2 headphones utilise Bluetooth wireless technology and offer the same studio-quality sound in a wireless package. The large-aperture drivers deliver deep and accurate bass response for an immersive listening experience, while the AK4331 advanced audio DAC and dedicated internal headphone amp provide superior clear, high-fidelity sound.

The ATH-M50xBT2 features dual microphones and beamforming technology, which provide improved vocal pickup ensuring crystal-clear audio call quality. Additionally, users can conveniently mute with the press of a button or access the built-in Amazon Alexa voice assistant, as well as Google Assistant and Siri.

These headphones have a battery life of up to 50 hours on a continuous full charge, with up to 3 hours of use on a 10-minute rapid charge via the USB-C connection, making them some of the longest-lasting wireless headphones available.

The multipoint pairing function allows users to stay connected to two Bluetooth devices at once, making it easier than ever to switch between tasks. You can also personalise and adjust the ATH-M50xBT2 to your preferences with the A-T Connect app. Adjust additional controls like activating low latency mode, adjust and save EQ to your headphones, change the L/R volume balance, select desired voice assistant, and more.

Included Accessories: The ATH-M50xBT2 comes with a 1.2 m (3.9") cable for an optional wired connection.


Specifications

Headphones
Type: Closed-back dynamic
Driver Diameter: 45 mm
Frequency Response: 15 - 28,000 Hz
Sensitivity: 99 dB/mW
Impedance: 38 ohms
Battery: DC 3.7V lithium polymer battery
Battery Life: Approx. 50 hours continuous use
Weight: Approx. 307g
Charging Time: Approx. 3.5 hours
Microphone Type: MEMS type
Microphone Sensitivity: -38 dB (1V/Pa at 1 kHz)
Microphone Frequency Response: 85 -15,000 Hz
Microphone Polar Pattern: Omnidirectional
Accessories Included: USB charging cable(30cm?USB Type-A / USB Type-C), Audio cable (1.2m/ f3.5mm stereo mini-plug), Pouch

Bluetooth

Bluetooth Version: Bluetooth Ver.5.0
Operating Range: Line of sight - approx. 10 m (33')
Compatible Bluetooth Profiles: A2DP, AVRCP, HFP, HSP

Notes: Audio-Technica's PRO5X headphones are proper all-rounders, just as happy in the DJ booth as they are in the studio. Plenty of people like them for general listening too. Cult favourites for good reason.

Supplier notes:
Audio-Technica updates the PRO5 line with the ATH-PRO5X professional DJ monitor headphones. Featuring lightweight, sturdy construction and two interchangeable, locking cables - a 1.2 m - 3.0 m (3.9' - 9.8') coiled cable and 1.2 m (3.9') straight cable - the ATH-PRO5X headphones are designed to stand up to professional DJ use.

The PRO5x headphones are equipped with newly developed 40 mm drivers capable of handling 1,500 mW of input power, giving you extremely accurate sound reproduction that remains distortion-free even at high volume. And the soft, durable earpads fit comfortably over the ears to provide excellent sound isolation.

Notes: Replacement Stylus for AT-XP3.

- Conical Bonded Stylus
- Carbon fibre-reinforced ABS cantilever
- Durable design for DJ application

Notes: - Elliptical bonded stylus
- Carbon ABS cantilever
- Durable design for DJ application

Notes: - Elliptical bonded stylus
- Tapered aluminium cantilever
- Durable design for DJ application
- Tracking Force Range: 2.0 to 4.0 g

Notes: ATN81CP Replacement stylus for AT81CP cartridge. Replacement stylus for AT81CP, Conical Stylus, Bonded Round Shank Construction and a Tracking force: 1.0 to 1.5 g (1.25 g standard)

0.6 mil conical replacement stylus for these cartridges: AT81CP, AT300P, AT3482, AT3482H/U, AT3482P, AT90CD

Specifications

Tracking force: 1.0 to 1.5 g (1.25 g standard)
Stylus: Conical bonded
Cartridge (sold separately): AT81CP

Notes: Replacement stylus for AT91 cartridge.

The ATN91 is also compatible stylus for CN5625AL and AT90 discontinued cartridges.

The ATN91 is also upgrade replacement styli for AT3600L.

The tracking force of AT3600L equipped with ATN91 is 2g, do not upgrade from ATN3600L to ATN91 when your tonearm does not allowed tracking force adjustment.

Notes: ATN95E Replacement stylus for AT95E cartridge - Compatible with AT93 cartridge and Compatible with AT95 cartridge

Replacement stylus for AT95E cartridgeThe ATN95E is also compatible with discontinued models AT93 and AT95.

Notes: ATN95EX Replacement stylus for AT95EX. Elliptical diamond stylus with Bonded Round Shank, Replacement stylus for AT95EX in red.

0.3 x 0.7 Diamond Elliptical Replacement Stylus with Bonded Round Shank Replacement stylus for these cartridges: AT95EX

Notes: Dual Moving Magnet Stereo Cartridge with Conical stylus

Entry-level Audio-Technica VM510CB Dual Moving Magnet Cartridge equipped with a conical bonded stylus less likely to be affected by placement and boasts stable tracing performance.

Entry-level VM cartridge model equipped with a conical bonded stylus. The round stylus is less likely to be affected by placement and boasts stable tracing performance.

Audio-Technica's internationally-patented Dual Magnet design replicates the structure of the cutter head.

Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.

Para-toroidal generating system

Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.

Centre shield plate reduces crosstalk

A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.

500 Series

Standard cartridge body fitted with the para-toroidal coils, centre shield plate, and 6N-OFC coil wire which is the same as 700 series.

Conical Bonded Stylus

The benefit of conical styli, even if the cartridge is "lean", is the ball surface of the stylus touches the groove of vinyl records precisely. Due to its stability, it has been used widely at radio stations.

Specifications

Cartridge & Stylus

Frequency Response: 20 - 20,000Hz
Channel Separation: 25dB (1kHz)
Vertical Tracking Angle: 23 degrees
Vertical Tracking Force: 1.8 to 2.2g (2.0g standard)
Stylus Construction: Bonded Round Shank
Recommended Load Impedance: 47,000O
Coil Impedance: 2,700O (1kHz)
Output Voltage: 5.0mV (1kHz, 5cm/sec.)
Output Channel Balance: 1.5dB (1kHz)
Stylus Shape: Conical Bonded
Cantilever: Aluminium Pipe
Static Compliance: 35 x 10-6 cm/dyne
Dynamic Compliance: 8 x 10-6 cm/dyne (100Hz)
Mounting: 1/2" centres
Dimensions: 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Accessories Included: Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2
Recommended Load Capacitance: 100 - 200pF
Replacement Stylus: VMN10CB
Stylus Size: 0.6 mil
Type: VM Type
Weight: 6.4g

Notes: Dual Moving Magnet Stereo Cartridge with Elliptical stylus

Audio-Technica's VM520EB Dual Moving Magnet Cartridge features an Elliptical shaped diamond tip that reduces tracing distortion for higher sound reproduction accuracy.

Standard elliptical stylus model equipped with an elliptical bonded stylus. This reduces tracing distortion and allows for more accurate sound reproduction.

Audio-Technica's internationally-patented Dual Magnet design replicates the structure of the cutter head.

Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.

Para-toroidal generating system

Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.

Centre shield plate reduces crosstalk

A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.

500 Series

Standard cartridge body fitted with the para-toroidal coils, centre shield plate, and 6N-OFC coil wire which is the same as 700 series.

Elliptical Bonded Stylus

Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Specifications

Cartridge & Stylus

Frequency Response: 20 - 23,000Hz
Channel Separation: 27dB (1kHz)
Vertical Tracking Angle: 23 degrees
Vertical Tracking Force: 1.8 to 2.2g (2.0g standard)
Stylus Construction: Bonded Round Shank
Recommended Load Impedance: 47,000O
Coil Impedance: 2,700O (1kHz)
Output Voltage: 4.0mV (1kHz, 5cm/sec.)
Output Channel Balance: 1.5dB (1kHz)
Stylus Shape: Elliptical Bonded
Cantilever: Aluminium Pipe
Static Compliance: 35 x 10-6 cm/dyne
Dynamic Compliance: 8 x 10-6 cm/dyne (100Hz)
Mounting: 1/2" centres
Dimensions: 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Accessories Included: Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2
Recommended Load Capacitance: 100 - 200pF
Replacement Stylus: VMN20EB
Stylus Size: 0.3 x 0.7 mil
Type: VM Type
Weight: 6.4g

Notes: Dual Moving Magnet Stereo Cartridge with Elliptical stylus

High-end elliptical stylus model equipped with a light-weight nude elliptical stylus to reduce the execution mass of the vibration system. This enables fuller frequency reproduction.

Audio-Technica's internationally-patented Dual Magnet design replicates the structure of the cutter head.

Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.

Para-toroidal generating system

Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.

Centre shield plate reduces crosstalk

A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.

500 Series

Standard cartridge body fitted with the para-toroidal coils, centre shield plate, and 6N-OFC coil wire which is the same as 700 series.

Elliptical Nude Stylus

Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Specifications

Cartridge & Stylus

Frequency Response: 20 - 25,000Hz
Channel Separation: 27dB (1kHz)
Vertical Tracking Angle: 23?
Vertical Tracking Force: 1.8 to 2.2g (2.0g standard)
Stylus Construction: Nude Round Shank
Recommended Load Impedance: 47,000O
Coil Impedance: 2,700O (1kHz)
Output Voltage: 4.0mV (1kHz, 5cm/sec.)
Output Channel Balance: 1.5dB (1kHz)
Stylus Shape: Elliptical Nude
Cantilever: Aluminium Pipe
Static Compliance: 35 x 10-6 cm/dyne
Dynamic Compliance: 8 x 10-6 cm/dyne (100Hz)
Mounting: 1/2" centres
Dimensions: 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Accessories Included: Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2, Non-magnetic screwdriver ×1, Brush ×1
Recommended Load Capacitance: 100 - 200pF
Replacement Stylus: VMN30EN
Stylus Size: 0.3 x 0.7 mil
Type: VM Type
Weight: 6.4g

Notes: Dual Moving Magnet Stereo Cartridge with Elliptical stylus with HS10 Headshell

Audio-Technica's VM530EN/H Dual Moving Magnet Cartridge with Headshell combination features a nude elliptical stylus offering improved frequency and phase responses whilst reducing distortion.

Features

VM530EN/H

Dual Moving Magnet Stereo Cartridge with Headshell

High-end elliptical stylus model pre-assembled with a lightweight aluminium headshell (AT-HS10). The nude elliptical stylus helps to reduce the execution mass of the vibration system whilst offering increased frequency reproduction.

Audio-Technica's internationally-patented Dual Magnet design replicates the structure of the cutter head.

Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.

Para-toroidal generating system

Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.

Centre shield plate reduces crosstalk

A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.

Preassembled With HS10 Headshell

VM530EN cartridge is fitted onto a die cast aluminium HS10 Headshell suitable for 4-pin turntable arms.

Elliptical Nude Stylus

Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Specifications

Cartridge & Stylus

Frequency Response: 20 - 25,000Hz
Channel Separation: 27dB (1kHz)
Vertical Tracking Angle: 23 ?
Vertical Tracking Force: 1.8 to 2.2g (2.0g standard)
Stylus Construction: Nude Round Shank
Recommended Load Impedance : 47,000O
Coil Impedance: 2,700O (1kHz)
Output Voltage: 4.0mV (1kHz, 5cm/sec.)
Output Channel Balance: 1.5dB (1kHz)
Stylus Shape: Elliptical Nude
Cantilever: Aluminium Pipe
Static Compliance: 35 x 10-6 cm/dyne
Dynamic Compliance: 8 x 10-6 cm/dyne (100Hz)
Mounting: 1/2" centres
Dimensions: 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Accessories Included: Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2
Recommended Load Capacitance: 100 - 200pF
Replacement Stylus: VMN30EN
Stylus Size: 0.3 x 0.7 mil
Type: VM Type
Weight: 6.4g

Notes: Dual Moving Magnet Stereo Cartridge with Microlinear stylus

Audio-Technica's VM540ML Dual Moving Magnet Cartridge features a Microlinear shaped diamond tip for improved high-frequency response with less wear and distortion.

Standard model with a Microlinear stylus. Distortion is low even on the inner circumference of a record because the curvature radius of the stylus tip does not alter even if the stylus becomes worn.

Audio-Technica's internationally-patented Dual Magnet design replicates the structure of the cutter head.
Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.

Para-toroidal generating system

Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.

Centre shield plate reduces crosstalk

A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.

500 Series

Standard cartridge body fitted with the para-toroidal coils, centre shield plate, and 6N-OFC coil wire which is the same as 500 series.

Microlinear Stylus

Microlinear profile diamond stylus offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.

Specifications

Cartridge & Stylus

Frequency Response: 20 - 27,000Hz
Channel Separation: 28dB (1kHz)
Vertical Tracking Angle: 23 degrees
Vertical Tracking Force: 1.8 to 2.2g (2.0g standard)
Stylus Construction: Nude Square Shank
Recommended Load Impedance: 47,000O
Coil Impedance: 2,700O (1kHz)
Output Voltage: 4.0mV (1kHz, 5cm/sec.)
Output Channel Balance: 1.0dB (1kHz)
Stylus Shape: Microlinear
Cantilever: Aluminium Tapered Pipe
Static Compliance: 40 x 10-6 cm/dyne
Dynamic Compliance: 10 x 10-6 cm/dyne (100Hz)
Mounting: 1/2" centres
Dimensions: 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Accessories Included: Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2, Non-magnetic screwdriver ×1, Brush ×1, Lead wire set ×1
Recommended Load Capacitance: 100 - 200pF
Replacement Stylus: VMN40ML
Stylus Size: 0.12 x 2.2 mil
Type: VM Type
Weight: 6.4g

Notes: Dual Moving Magnet Stereo Cartridge with Microlinear stylus and HS10 Headshell

Audio-Technica's VM540ML/H Dual Moving Magnet Cartridge with Headshell combination features a Microlinear shaped diamond tip for improved high-frequency response with less wear and distortion.

Features

Dual Moving Magnet Stereo Cartridge with Headshell

Standard model with a Microlinear stylus, comes pre-assembled with a lightweight aluminium headshell (AT-HS10). Distortion is low even on the inner circumference of a record because the curvature radius of the stylus tip does not alter even if the stylus becomes worn.

Audio-Technica's internationally-patented Dual Magnet design replicates the structure of the cutter head.

Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.

Para-toroidal generating system

Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.

Centre shield plate reduces crosstalk

A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself.

Preassembled With HS10 Headshell

VM540ML cartridge is fitted onto a die cast aluminium HS10 Headshell suitable for 4-pin turntable arms.

Microlinear Stylus

Microlinear profile diamond stylus offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.

Specifications

Cartridge & Stylus

Frequency Response: 20 - 27,000Hz
Channel Separation: 28dB (1kHz)
Vertical Tracking Angle: 23 degrees
Vertical Tracking Force: 1.8 to 2.2g (2.0g standard)
Stylus Construction: Nude Square Shank
Recommended Load Impedance: 47,000O
Coil Impedance: 2,700O (1kHz)
Output Voltage: 4.0mV (1kHz, 5cm/sec.)
Output Channel Balance: 1.0dB (1kHz)
Stylus Shape: Microlinear
Cantilever: Aluminium Tapered Pipe
Static Compliance: 40 x 10-6 cm/dyne
Dynamic Compliance: 10 x 10-6 cm/dyne (100Hz)
Mounting: 1/2" centres
Dimensions: 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Accessories Included: Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2
Recommended Load Capacitance: 100 - 200pF
Replacement Stylus: VMN40ML
Stylus Size: 0.12 x 2.2 mil
Type: VM Type
Weight: 16.8g

Notes: Dual Moving Magnet Mono Cartridge for Mono Vinyl LP records

Designed for playing Mono Vinyl LP records, Audio-Technica's VM610MONO Dual Moving Magnet Cartridge is equipped with a conical bonded stylus less likely to be affected by placement and boasts stable tracking performance.

With a specialized body and internal wiring dedicated to monaural sound reproduction, the VM610MONO conical stylus cartridge is designed for playing mono records. Part of the 600 Series in Audio-Technica's new VM cartridge line - a line that harks back to A-T's early days as a manufacturer primarily of high-end phono cartridges - the VM610MONO is equipped with dual magnets that are internally connected to reduce record noise and obtain a highly focused "center" sound image that stereo cartridges can't provide. Includes mounting hardware.

Specifications

Cartridge & Stylus

Frequency Response: 20 - 20,000Hz
Vertical Tracking Angle: 23 degrees
Stylus Construction: Bonded Round Shank
Recommended Load Impedance : 47,000O
Coil Impedance: 1,400O (1kHz)
Output Voltage: 3.0mV (1kHz, 5cm/sec.)
Stylus Shape: Conical Bonded
Cantilever: Aluminium Pipe
Static Compliance: 35 x 10-6 cm/dyne
Dynamic Compliance: 8 x 10-6 cm/dyne (100Hz)
Mounting: 1/2" centres
Dimensions: 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Accessories Included: Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2
Recommended Load Capacitance 100 - 200pF
Replacement Stylus: VMN10CB
Stylus Size: 0.6 mil
Type: VM Type
Weight: 6.4g

Notes: Dual Moving Magnet Mono Cartridge for Shellac or Phonograph records

Model dedicated to 78 RPM records, whose round stylus has a large curvature radius at the tip. The curvature radius is 3 mil, and suitable for playing 78 RPM records from a wide variety of eras.

Audio-Technica's internationally-patented Dual Magnet design replicates the structure of the cutter head.

Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking.

Para-toroidal generating system

Para-toroidal coils improve generating efficiency and offers superb linearity, since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores.

Mono body

For monaural operation, left and right channels should be connected. A mono body on which left and right terminals are connected internally reduces record noise which is primarily in the vertical direction and obtains a highly focused 'centre' sound image compared with stereo bodies.

600 Series

Specialised 600 series mono body with internal wiring dedicated to monaural sound.

Conical Bonded (3mil) Stylus

A conical bonded stylus with a large curvature radius at the tip. The curvature radius is 3 mil, and suitable for playing 78 RPM records from a wide variety of eras.

Specifications

Cartridge & Stylus

Frequency Response: 20 - 20,000Hz
Vertical Tracking Angle: 23 degrees
Stylus Construction: Bonded Round Shank
Recommended Load Impedance: 47,000O
Coil Impedance: 1,400O (1kHz)
Output Voltage: 3.0mV (1kHz, 5cm/sec.)
Stylus Shape: Conical Bonded (3mil)
Cantilever: Aluminium Pipe
Static Compliance: 15 x 10-6 cm/dyne
Dynamic Compliance: 2.0 x 10-6 cm/dyne (100Hz)
Mounting: 1/2" centres
Dimensions: 17.3 (H) x 17.0 (W) x 28.2 (L) mm
Accessories Included: Cartridge installation screws 5mm ×2 and 10mm ×2, Washer ×2, Hexagon nut ×2
Recommended Load Capacitance: 100 - 200pF
Replacement Stylus: VMN70SP
Stylus Size: 3.0 mil
Type: VM Type
Weight: 6.4g

Notes: Replacement stylus for VM510CB & VM610MONO

VMN10CB Replacement stylus for VM510CB & VM610MONO. Conical Bonded stylus, Bonded Round Shank construction in blue

Features

Even the finest diamond stylus becomes worn after an extended period of play.The styli in our VM cartridges are no different. But it is easy to replace the stylus and continue to use your cartridge. Our renewed VM cartridges have 7 styli and 3 types of bodies to choose from. Not only is it not necessary to buy an entirely new cartridge, but you can also enjoy the experience of upgrading your stylus or trying a new cartridge/stylus combination.

Notes: Replacement stylus for VM530EN

VMN30EN Replacement stylus for VM530EN. Elliptical Nude stylus, Nude Round Shank construction in orange

Features

Even the finest diamond stylus becomes worn after an extended period of play.The styli in Audio Technica's VM cartridges are no different. But it is easy to replace the stylus and continue to use your cartridge. Our renewed VM cartridges have 7 styli and 3 types of bodies to choose from. Not only is it not necessary to buy an entirely new cartridge, but you can also enjoy the experience of upgrading your stylus or trying a new cartridge/stylus combination.

Notes: Replacement stylus for VM670SP

VMN70SP Replacement stylus for VM670SP. Conical (3mil) stylus, Nude Rectangular Shank construction in grey

Features

Even the finest diamond stylus becomes worn after an extended period of play.The styli in our VM cartridges are no different. But it is easy to replace the stylus and continue to use your cartridge. Our renewed VM cartridges have 7 styli and 3 types of bodies to choose from. Not only is it not necessary to buy an entirely new cartridge, but you can also enjoy the experience of upgrading your stylus or trying a new cartridge/stylus combination.

Notes: Audio-Technica's AT-LPW50BT-RW wireless turntable provides optimal high-fidelity audio reproduction with the option of wired or Bluetooth listening. The manual record player's stunning rosewood-finished veneer adds to the turntable's refined style, and also dampens low-frequency acoustic feedback to ensure you experience crystal clear, uninterrupted sound.

Incorporating a top-quality tonearm and the critically-acclaimed AT-VM95E, Audio-Technica's AT-LPW50XBT-RW record player with Bluetooth comes complete with everything a vinyl enthusiast needs to enjoy an immersive, rich analog audio experience.

The LPW50BT-RW takes Audio-Technica's range of wooden turntables to the next level, incorporating a variety of enhanced features and wireless connectivity. This Bluetooth vinyl player is the culmination of Audio-Technica's 60 years of dedication to analog listening, creating a record player that produces unrivalled sound quality while featuring innovative audio technology.

Integrated Bluetooth technology gives listeners the unique option to operate the AT-LPW50XBT-RW belt-drive turntable wirelessly. Whether you prefer wired listening to enjoy the distinct warmth of analog audio with no compromise on sound quality, or want to try out pairing your turntable with your brand new wireless headphones or speakers, you can do it all with this versatile record player.

Specifications

Turntable

Type: Belt-drive manual turntable
Motor: DC servo with Active Speed Stabilization
Drive Method: Belt drive
Speeds: 33-1/3 RPM, 45 RPM
Turntable Platter: Die-cast aluminum
Wow and Flutter: < 0.15 % WRMS (33 RPM) at 3 kHz
Signal-to-Noise Ratio: > 60 dB
Output Level: PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
LINE: 200 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain: 35 dB nominal, RIAA equalized
Power Supply Requirements: 100 to 240 V, 50/60 Hz, 0.5 A Max
Power Consumption: 1.8 W
Dimensions: 420 mm (16.54") x 340 mm (13.39") x 126 mm (4.96") (W x D x H)
Weight: 5.5 kg (12 Ibs)

Accessories Included

Dust cover
Rubber mat
Platter (with drive belt)
Dust cover hinges
Counterweight
Headshell (AT-HS4 SV) with VM stereo cartridge (AT-VM95EBK)
45-RPM adapter
RCA audio cable: (Approx. 1.0m (3.3'))
AC adapter: (Approx. 1.5m (4.9'))

AC Adapter: 12 V, 1.0 A
Tonearm Type: Static balanced straight carbon tonearm
Effective Arm Length: 223.6 mm
Overhang : 18.6 mm
Tracking Error Angle: Less than 2.0-
Stylus Pressure Adjustment Range: 0 to 3.0 g
Applicable Cartridge Weight: (including headshell) 11.5 to 16.5 g
Replacement Stylus: AT-VMN95EBK (sold separately)
Replacement Headshell: AT-HS4 SV (sold separately)
Replacement Belt: AT-LPW50BT exclusive belt (sold separately)
Communication System: Bluetooth version 5.2
Frequency Band: 2.402 GHz to 2.480 GHz
Maximum RF Output: 15 mW EIRP
Maximum Communication Range: Line of sight - approx. 10 m (33')
Modulation Method: GFSK, Pi/4DQPSK, 8DPSK
Compatible Bluetooth Profile: A2DP
Support Codec: SBC

Notes: AT-VM95ML/H VM95 series Microlinear stereo cartridge on AT-HS6 Headshell - AT-VM95ML mounted on AT-HS6BK headshell, The total set weight is 15.5g and Assembled and tested in the Audio-Technica Factory in Fukui-Japan

VM95 series Microlinear stereo cartridge on AT-HS6 Headshell
AT-VM95ML mounted on AT-HS6BK headshell
The total set weight is 15.5g
Assembled and tested in the Audio-Technica Factory in Fukui-Japan
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VMN95C

AT-VMN95E

AT-VMN95EN

AT-VMN95ML

AT-VMN95SH

AT-VMN95SP

Microlinear Stylus

Microlinear profile diamond stylus offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.

Preassembled With AT-HS6BK Headshell

The AT-VM95C cartridge is fitted onto the 9g aluminium die cast body headshell

Cartridge & Stylus

Frequency Response: 20 - 25,000 Hz
Channel Separation: 23 dB (1 kHz)
Vertical Tracking Angle: 23-
Vertical Tracking Force: 1.8 to 2.2g (2.0g standard)
Stylus Construction: Nude Square Shank

Notes: AT-VMN95EN VM95 series Elliptical Nude replacement stylus - Aluminium Cantilever, Elliptical Nude Stylus and Nude Round Shank

VM95 series Elliptical Nude replacement stylus
Aluminium cantilever
Elliptical Nude Stylus
Nude Round Shank
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VMN95C

AT-VMN95E

AT-VMN95EN

AT-VMN95ML

AT-VMN95SH

AT-VMN95SP

Elliptical Nude Stylus

Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

Notes: AT6108 Cartridge To Headshell Leadwires - 6N-OFC 99.99997% high-purity oxygen-free copper, 0.12mm x 29 core strand construction, Damping material used in wire sheath (titanium compounded sheath) and Gold plated terminals.

Features

6N-OFC Cartridge to headshell leadwires with gold plated terminals and 0.12 mm x 29 core strand construction