Synth Accessories

Notes: Removable disc for use with AMP Electronics' Star Song synthesiser.

*** The Star Song is not included, it is shown in the photo for demonstration purposes only. ***

Notes: Add an extra layer of protection to your Orba with our custom Silicone Sleeve. This flexible sleeve allows full access to buttons and cable ports and features a removable strap long enough to attach Orba to your wrist or backpack.

Notes: The perfect companion to MicroFreak's Vocoder engine. This specially designed microphone attachment lets you add your vocals to MicroFreak's unique mix of digital and analog.

Transform your toplines, harmonies, and spoken word into inspiring modulated textures.

With its gooseneck design, this electret microphone is built with ergonomics and ease of use in mind. Adjust its height and angle to suit your setup, and connect it directly to MicroFreak's head-phone connector. Thanks to an additional socket on the microphone's base, you can still connect your headphones for monitoring.

In terms of sound, the microphone is designed to work perfectly with the MicroFreak Vocoder engine's 16-band frequency range, ensuring accurate detection of the complex harmonics of the human voice. MicroFreak will detect when the mic is connected and automatically set the gain, but this can be easily adjusted in the utility menu.

Jump from subtle synthesized harmonies to robot vocals in no time with the MicroFreak Vocoder Microphone!

Notes: The Buchla Music Easel Program Manager Card

Store your best sonic memories on the Program Manager Card! The PMC takes full advantage of the program interface, storing up to 48 Easel presets and interfacing with your computer with a class-compliant MIDI connection. The Buchla Program Manager App for Mac and Windows gives you the power to manage banks, create programs, and import and export your presets for sharing.

Evolution of an idea

The program interface's edge card connector was originally designed to let artists create presets by wiring resistors to a circuit board to fix the positions of the sliders and banana connections. Each preset was its own card. Simply swapping cards in the program interface completely changed the sound. This was valuable, if not outright necessary, to musicians who needed to easily recreate patches for performance and create repertoire. The 2013 "iProgram Card" created a vital link between computer and Easel. Now, in 2022, Buchla USA has refreshed and simplified the design, giving it more memory, embed-ability, and making it easier to use.

Virtual Solder Station

While you can still solder up some sounds for all generations of the Easel, the new Program Manager Card provides microcontroller precision and computer convenience. Serving as the digital bridge between your computer's USB port and the 28 pins of the Program Interface, the PMC gives you instant recall and easy access to 48 unique programs that control almost every parameter and patchpoint on the Easel's front panel. Repeatability and repertoire are made instantly available.

Computer Precision

Using the Buchla Program Manager Application in Mac or Windows to design presets gives you even more programming options than the Easel's front panel controls. The unique "Depth" controls for the patch cords put a virtual knob on every cable, allowing gradual and even inverted connection for every patch point. The fine resolution provided by high resolution controls means you can dial in extremely precise values for parameters, in a way not easily achieved by hand. The application serves as an endless extension to the Program Manager, with nearly unlimited space for presets and banks.

Sharing is Fun

Import and Export features make it easy to backup or share your presets and complete banks with other Easel musicians in a simple, small file.

Adventure Awaits

With the optional embed kit, you can install the Program Manager card directly into your easel, replacing the Program Interface connector with the screen and buttons. Embedding the card makes it easier to control and travel with.

What about the iProgram Card?

The Program Manager Card is an updated version of the iProgram Card. With a firmware update that we'll be providing very shortly, you can use the new software with your iProgram Card over a USB connection.

Compatibility

The Program Manager Card is compatible out-of-the-box with the Easel Command 208C and upcoming Music Easel. It can be used with the 2013-2017 Music Easels with a DIY modification to the card's connectors or to the Easel itself.

Getting Started

The Program Manager system is composed of the card itself that installs into your 208 Program Interface, and Mac/Windows software where you design and manage presets.

Notes: The Buchla Easel X7 USB-A MIDI HOST Expander adds USB-A MIDI host functionality to the Easel Command.

Buchla Easel X7 USB-A MIDI HOST Expander works requires the Easel Command. It will not work with the à la carte 208C module in a 200e system.

Notes: Transparent protection for your gear. The Decksaver Arturia Microfreak Cover is a highly-durable protective cover constructed from a polycarbonate shell for optimal protection. The cover is custom moulded to fit the shape of the Arturia Microfreak and is finished with a high-quality smoke/clear sheen.

The cover is ideal for travelling, helping to protect your Microfreak from superficial damage. The cover protects from dust, liquid and accidental impact damage, whilst accommodating cables.

Please note: The Arturia Microfreak Synthesiser is not included in this purchase. It is shown for demonstration purposes only.

Dimensions (LxWxH): 31.5 x 23.8 x 8.5 cm

Weight: 0.35 kg

Notes: The Decksaver Ashun Sound Machines Hydrasynth Desktop Cover is constructed from a polycarbonate shell for optimal protection. The cover is custom moulded to fit the shape of the Hydrasynth, and comes complete with a high-quality smoke/clear sheen. This is the ultimate choice for anyone wishing to protect their synthesizer from dirt, dust, and superficial damage. It also provides easy access to inputs and outputs at all times.

Please note: The Ashun Sound Machines Hydrasynth Desktop Synthesiser is not included in the purchase. It is shown for demonstration purposes only.

Dimensions:
Length: 44.3 cm
Width: 23.8 cm
Height: 6.5 cm

Notes: The Decksaver Behringer Lyra-8 Cover features an ultra-durable polycarbonate shell, designed to protect from dust, liquid, particulates and accidental impact damage. It will also protect against superficial damage such as scratches or bumps while on the move. The high quality smoke/clear sheen allows you to see the Lyra-8 through the cover, allowing you to see your gear at all times. The smooth and sheen like finish will slide straight into a bag, ideal for the travelling musician. The cover is custom moulded to shield keys, controls and more from damage, while still allowing you to accommodate cables.

Please note: The Soma Laboratory Lyra-8 Synthesiser is not included in this purchase. It is shown for demonstration purposes only.

Dimensions (LxWxH): 27.2 x 27.2 x 3.6 cm
Weight: 0.35 kg

Notes: The Headliner 2-Tier Desktop Synth Stand was designed to improve your workflow and help you stay organized while fitting more gear on your production desk. It fits two compact devices like synthesizers, controllers, drum machines, and effects modules. The angled design makes it easier to reach knobs and view LCD screens.

The Headliner 2-Tier Desktop Synth Stand is adjustable in width from 7.3" to 11.5" and fits a variety of devices from Roland, Korg, Elektron, and more (partial list below). It is made from solid steel and includes non-slip rubber strips for added stability.

Features
Fits two devices like synthesizers, controllers, drum machines, and effects modules
Improve your workflow and stay organized while fitting more gear on your production desk
Angled stand makes it easier to reach knobs and view LCD screens
Solid steel construction with non-slip rubber pads keep stand in place
Width adjustable from 7.3" to 11.5"
Best fits devices from 8" to 14" in width
Each tier has a depth of 7"
Overall dimensions of stand (WxDxH): 7.3"-11.5" x 14" x 10.75"
Includes non-slip rubber strips
Fits: Akai Fire, Akai LPD8, Akai MPX8, Alesis SR-16, Arturia SparkLE, Behringer Crave, Behringer TD-3, Behringer RD-6, Dreadbox Typhon, Elektron Digitone, Korg nanoPAD2, Korg SQ-1, Korg Volca Bass, Korg Volca Beats, Korg Volca Drum, Korg Volca Kick, Korg Volca NuBass, Korg Volca Sample 2, Native Instruments Maschine Mikro MK3, PreSonus ATOM SQ, Roland Boutique Series, Roland MC-101, Roland TB-3 Touch Bassline, Roland TR-6S, and more.

Notes: The Headliner 3-Tier Desktop Synth Stand was designed to improve your workflow and help you stay organized while fitting more gear on your production desk. It fits three compact devices like synthesizers, controllers, drum machines, and effects modules. The angled design makes it easier to reach knobs and view LCD screens.

The Headliner 3-Tier Desktop Synth Stand is adjustable in width from 7.3" to 11.5" and fits a variety of devices from Roland, Korg, Elektron, and more (partial list below). It is made from solid steel and includes non-slip rubber strips for added stability.

Features
Improve your workflow and stay organized while fitting more gear on your production desk.
Fits three devices such as synthesizers, controllers, drum machines, and effects modules.
Angled stand makes it easier to reach knobs and view LCD screens.
Solid steel construction with non-slip rubber strips keep stand and equipment in place.
Width adjustable from 7.25" to 11.5". Best fits devices from 8" to 14" in width.
The lower tier has a depth of 7". The middle and upper tiers have a depth of 5.25".
Overall dimensions of stand (WxDxH): 7.25"-11.5" x 17" x 17.5".
Includes non-slip rubber strips.

Fits*: Akai Fire, Alesis SR-16, Arturia SparkLE, Behringer Crave, Behringer TD-3, Behringer RD-6, Elektron Digitone, Native Instruments Maschine Mikro MK3, PreSonus ATOM SQ, Akai LPD8, Akai MPX8, Dreadbox Typhon, Korg nanoPAD2, Korg SQ-1, Korg Volca Bass, Korg Volca Beats, Korg Volca Drum, Korg Volca Kick, Korg Volca NuBass, Korg Volca Sample 2, Roland Boutique Series, Roland MC-101, Roland TB-3 Touch Bassline, Roland TR-6S
*Some devices may not fit on all tiers.

Notes: The Headliner Mod Base desktop production stand was designed to improve your workflow and help you stay organized while fitting more gear on your production desk. It fits compact devices like synthesizers, controllers, drum machines, and effects modules. The angled design makes it easier to reach knobs and view LCD screens.

Adjustable book-end brackets keep gear from moving around, while a removable center divider can be used to fit 2 small devices side by side. The Headliner Mod Base is made from solid steel with non-slip rubber pads to keep stand securely in place.

The MOD RISER is the companion stand to the Mod Base. Use them together to form a solid dual desktop stand with the included joining plates.

Features
Fits compact devices like synthesizers, controllers, drum machines, and effects modules.
Improve your workflow and stay organized while fitting more gear on your production desk
Angled stand makes it easier to reach knobs and view LCD screens
Solid steel construction with non-slip rubber pads keep stand in place
Adjustable book-end brackets keeps gear from moving around
Removable center divider to fit 2 small devices side by side or one larger device
Use with Headliner Mod Riser to make 2-tier stand
Fits two devices up to 8" x 7.75" or one device 16.25" x 7.75"
Dimensions (WxDxH): 19" x 7" x 5"
Fits: 1010music Blackbox Studio, 1010Music Bluebox, Akai Fire, Akai LPD8, Akai MPX8, Alesis SR-18, Alesis SR-16, Analogue Solutions Generator, Arturia SparkLE, Arturia Beatstep, Behringer Crave, Behringer TD-3 / RD-6, Boss DR-3 DR. Rhythm, Dreadbox Typhon, Elektron Model, Elektron Octatrack MKII, Elektron Analog Heat, Elektron Digitakt, Elektron Digitone, Korg nanoPAD2, Korg Volca Bass, Korg Volca Beats, Korg Volca Drum, Korg Volca NuBass, Korg SQ-1, Korg Volca Kick, Korg Volca Sample 2, Korg KR mini, Korg Electribe, Native Instruments Maschine Mikro MK3, Novation Circuit, Novation Launchpad Mini MK3, PreSonus ATOM SQ, PreSonus ATOM, Roland TB-3 Touch Bassline, Roland Boutique TR-06, Roland MC-101, Roland TR-6S, Roland TR-08, Roland JU-06A, and more.

Notes: DC motor for use with the Field Kit DC interface. Great for attaching pieces of tape or small objects to the shaft and get sounds out of surfaces and objects. You can use an electromagnetic pickup to use it as an oscillator.

The DC interface of the Field Kit allows you the control the speed of the motor with a knob or a control voltage, like an LFO or a trigger.

Notes: The Field Kit Sensor Pack A consists of 5 sensors:

- Button/Jack
- Electret Microphone
- Light Sensor
- Temperature Sensor
- Ball Switch
- 2 x Dupont 3 contact cable to connect the Sensors to the Field Kit

Button/Jack:

This is rather a utility tool than an actual sensor. It allows you to either use a pushbutton or any CV-Signal (0- 5V) as a signal source. You can select to either use the button or any signal connected to the jack input with the jumper located right next to pin-header. The voltage present at the output upon a button press can be selected with the two jumpers next to the button. The button and jack can be used with both the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Electret Microphone:

The electret microphone provides a simple solution to use your surroundings as a sample source. The board features a little trimmer to adjust the gain of the microphone pre-amplifier. Use a little screwdriver to adjust the gain according to the printing on the sensor board. It's preferable to adjust the signal level with the trimmer first and only use the level pot of the analog signal interface as a second adjustment stage. The electret microphone has an omnidirectional directivity and is capable of capturing the whole frequency spectrum from 20 to 20000 Hz. The electret microphone is best be used with the ANALOG IN of the Field Kit's Sensor Interface.

Light Sensor:

The light sensor will change the output voltage depending on the light intensity. The spectral sensitivity is similar to the human eye, covering the full spectra of visible light, with a peak at 570nm (green/yellow). The change of the voltage according to the light intensity can be set with the three jumpers on the board. Set those jumpers according to printing on the board. The light sensor can be used with the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Temperature Sensor:

The temperature board features two output modes: a continuous CV or a trigger.

CV Mode: The board will output a continuous voltage in range 0 - 5 V depending on the measured temperature and scaled to the set lower and upper temperature limit.

Trigger Mode: The board will generate a trigger whenever the measured temperature rises above the set upper limit temperature. LED 1 will blink whenever a trigger is generated. The sensor covers a temperature range from -55-C to +125-C.

Ball Switch:

The ball switch consists of a little bouncy ball jumping around in a container connecting two contacts and thus acts like a switch. In contrary to a normal push button, which has very well defined states, the switching of a ball switch is more similar to a percussion shaker. There are two resting-positions which define a certain state of the switch: the board is lying flat on the table with its bottom facing the table: the switch is open the board is lying flat on the table with its top facing the table: the switch is closed. The voltage assigned to those states can be set with the two jumpers on the board. Refer to the printing on the board to identify the position that suits your needs. The ball switch can be used with the ANALOG IN and the DIGITAL IN of the Field Kit's Sensor Interface.

Notes: Protect your Moog semi-modular synths when not in use. This water-repellent dust cover is made from rugged Ballistic Cordura to safeguard your gear from dust, spills, and other studio (and stage) mishaps, while the ultra-soft interior remains gentle against your synth.

This protective cover is custom fit with room to accommodate patch cabling and rear I/O panel access. Adjustable Velcro straps ensure your dust cover fits snug and stays in place.

The 2-Tier Dust Cover is a perfect fit for any two 60HP Moog semi-modular synthesizers mounted together in a Moog 2-Tier Rack.

In the box

1x 2-Tier Dust Cover

Technical specs

Fits on Moog 60HP 2-Tier system racks.

Weights & dimensions

Product only

Weight (lbs) 0.45 lbs
Weight (kg) 0.20 kg

Imperial (in) 13.8" H x 5.9" W x 1.2" D
Metric (cm) 35 cm H x 15 cm W x 3 cm D

Product in box

Weight (lbs) 0.47 lbs
Weight (kg) 0.20 kg

Imperial (in) 5" H x 13" W x 2" D
Metric (cm) 12.7 cm H x 33.0 cm W x 5 cm D

Notes: Moog Music SR Series Cases feature generous padding around a semi-rigid A.B.S. shell, a rugged Ballistic Cordura outer that resists tears and abrasions, and laminated water-resistant zippers to offer on-the-go protection and safe storage for your instrument.

Multiple strap and handle configurations keep your commute comfortable, and multifunction pockets ensure you're organized on arrival.
Designed in conjunction with Subsequent 25
Rugged and road-ready semi-rigid A.B.S shell
Tear-resistant Ballistic Cordura outer
Water-resistant laminate zippers
Also fits Sub Phatty!

Notes: Protect your Moog Subsequent 25 when not in use. This water-repellent dust cover is made from rugged Ballistic Cordura to safeguard your gear from dust, spills, and other studio (and stage) mishaps, while the ultra-soft interior remains gentle against your synth.

Custom fit with a side recess to accommodate I/O panel access.
Designed in conjunction with Subsequent 25 for a custom fit
Water-repellant and tear-resistant Ballistic Cordura outer
Ultra-soft interior
Cutout for IO panel access

Notes: Moog Music SR Series Cases feature generous padding around a semi-rigid A.B.S. shell, a rugged Ballistic Cordura outer that resists tears and abrasions, and laminated water-resistant zippers to offer on-the-go protection and safe storage for your instrument.

Multiple strap and handle configurations keep your commute comfortable, and multifunction pockets ensure you're organized on arrival.
Designed in conjunction with Subsequent 37
Rugged and road-ready semi-rigid A.B.S shell
Tear-resistant Ballistic Cordura outer
Water-resistant laminate zippers

Notes: Protect your Moog Subsequent 37 when not in use. This water-repellent dust cover is made from rugged Ballistic Cordura to safeguard your gear from dust, spills, and other studio (and stage) mishaps, while the ultra-soft interior remains gentle against your synth.

Custom fit with a side recess to accommodate I/O panel access.
Designed in conjunction with Subsequent 37 for a custom fit
Water-repellant and tear-resistant Ballistic Cordura outer
Ultra-soft interior
Cutout for IO panel access

Notes: ***B-STOCK: Box opened, product in perfect working order***


Protect your Moog Subsequent 37 when not in use. This water-repellent dust cover is made from rugged Ballistic Cordura to safeguard your gear from dust, spills, and other studio (and stage) mishaps, while the ultra-soft interior remains gentle against your synth.

Custom fit with a side recess to accommodate I/O panel access.
Designed in conjunction with Subsequent 37 for a custom fit
Water-repellant and tear-resistant Ballistic Cordura outer
Ultra-soft interior
Cutout for IO panel access

Notes: The DK-01 is a simple, elegant case for mounting a Roland Boutique module. Once docked in place, the module can be used in a flat position, or tilted to two different angles for easier viewing and sound programming.

- Simple docking case for Roland Boutique series modules
- Modules can be docked quickly and easily
- Two-position tilt stand for easy panel access
- For a dock with an integrated keyboard, see the K-25m Keyboard Unit

Notes: The CB-B37 is a perfect fit for Roland's GAIA 2 and JUPITER-Xm synthesizers, and it also works with the legacy GAIA SH-01 and other 37-note keyboards. This attractive bag features durable exterior materials, thick internal padding, and four moveable internal corner cushions to keep your instrument secure during transport. The reinforced handle and detachable shoulder strap offer two carrying options, while the large front pocket provides a home for stowing an AC adaptor, accessories, and a small companion instrument such as an AIRA Compact or a Roland Boutique.

High-Quality Protection for Roland's Advanced Compact Synths

GAIA 2 picks up where the popular GAIA SH-01 left off, combining advanced wavetable and virtual analogue engines with a friendly hands-on workflow that makes learning synthesis and crafting sounds fast and fun. JUPITER-Xm brings you the power of the flagship JUPITER-X in a compact size, backed by Roland's next-generation ZEN-Core sound engine. The CB-B37 is an essential companion for these 37-note marvels, providing a safe and secure home while traveling and making music around town.

Specifications

Main Material: Polyester

Size & weight

Dimensions (excluding protruding parts):

720 (W) x 380 (D) x 125 (H) mm
28-3/8 (W) x 15 (D) x 4-15/16 (H) inches

Weight:
1.45 kg
3 lbs 4 oz

Notes: This changes everything.

Roland Cloud Connect unlocks instant access to an ever-expanding universe filled with thousands of iconic sounds and expansions for your Roland hardware instrumentiusing just your mobile device and the included wireless adapter.

A year of sonic bliss.

Roland Cloud Connect gives you an entire year of everything our Pro membership tier has to offer - including unlimited use of over 30,000 sounds and iconic Model Expansions for your hardware or software instruments. You also get a full library of authentic Roland virtual instruments, including the deep sound design of ZENOLOGY Pro. And with Zenbeats and Zentracker, you have the freedom to make music anywhere. After your first year, you can renew or scale your membership up or down to meet your needs.

Browse sounds and expansions wirelessly.

Roland Cloud Connect delivers instant gratification with wireless connectivity. Just plug the included WC-1 wireless adapter into your supported Roland hardware and use the iOS/Android mobile app to browse and install Sound Packs, Wave Expansions, Model Expansions, and more. All compatible content is fully searchable and automatically synchronizes with your Roland Account, as well as Roland Cloud Manager on your desktop computer.

Preview and play sounds instantly.

With the mobile app, you can audition individual tones, Sound Packs, or Model Expansions with a single tap. After you find what you're looking for, you can download it to your hardware instrument in seconds. No matter where you are or what kind of sound you're looking for, Roland Cloud Connect has you covered.

System requirements:

To use Roland Cloud Connect, you'll need the following:

A supported Roland hardware instrument
A compatible iOS or Android smartphone or tablet
Access to a wireless internet connection (the user is responsible for all data transmission fees)

Specifications

Interface: Hi-Speed USB
Standards: IEEE 802.11 a/b/g/n 2.4 GHz, 5 GHz
Adapted Channel
2.4 GHz band: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
5 GHz band: 36, 40, 44, 48, 52, 56, 60, 64
* Cannot connect to an access point with a hidden SSID.
Security: WPA3-PSK (AES), WPA2-PSK (AES/TKIP), WPA-PSK (AES/TKIP)
Bluetooth: Standard Ver. 5.0
Antenna: Internal type
Indicator: Function indicator LED
Operator: Switch
Power Supply: USB bus powered
Current Draw: 80 mA (USB bus power)
Accessories: Owner's Manual
More: An access point / router that supports the DHCP server function is required. See the WC-1 product page for a list of compatible models.

Size & weight

Width

Excluding cap: 69.2 mm/2-3/4 inches - Including cap: 71.1 mm/2-13/16 inches

Depth

Excluding cap: 23.5 mm/15/16 inches - Including cap: 23.5 mm/15/16 inches

Height

Excluding cap: 10.0 mm/7/16 inches - Including cap: 10.0 mm/7/16 inches

Weight

Excluding cap: 13.3 g/0.5 oz/Including cap: 15.1 g/0.6 oz

Notes: Cotton dust cover with Lyra-8 logo (black and white).

Notes: Cotton dust cover with Lyra-8 logo (white and black).

Notes: EcoSynth is a small, portable Eurorack modular case solution, designed for your desktop! It's a practical solution designed to save your hard-earned cash for modules. If you're looking for a small desktop solution to augment other desktop electronic hardware, this is for you. If you need a larger case, EcoSkiff passes on the savings for more traditional size racks like 84HP and 104HP.

Save on money and space: get just as much HP as you need!

Available in the following sizes:
24HP
44HP
64HP
84HP
104HP

Features and specifications:

Over-current protection: shuts off each power rail automatically if modules use too much current on that rail
The skiff goes together with just a Phillips head screwdriver!
Comes with 3mm slide nuts
Max module depth: 44mm
Max module depth above power supply: 33mm

Specifications, 24HP-44HP:
Power output:
+12V @ 1A
-12V @300mA
5V@ 150mA
Power connectors: 2 (plus optional flying bus cable)

Specifications, 64HP-104HP:
Power output:
+12V @ 2A
-12V @750mA
5V@ 1.5A
Power connectors: 15
Daisy chains to another EcoSkiff, Skiff Power, Five Amp Power, or Schottkey DC

Requires a 12V 5A center positive power brick with a 5.5mm x 2.1mm tip.
Assembly required, but no soldering needed.

Notes: Line module is designed to bring audio signals into and out of the OP-Z. Use external audio signals in your mix, send the audio from selected tracks out, switch easily between mono and stereo signals and even make FX loops with your favourite effects pedals.

Audio line in/out

Now you can easily connect anything with an audio output to your OP-Z: effects pedals, radios, synths, computers or even your phone. With audio out, you can separate and process individual tracks by routing them to the module output. The line module stereo output can even be used as two mono outputs.

Sync in/out

Tempo Sync other compatible gear to OP-Z so you're on the beat, all the time.

MIDI in/out

Line module allows you to use OP-Z to control other synths with MIDI input by using the OP-Z sequencer with your external equipment. With MIDI in, you can use an external MIDI controller, keyboard or computer to control your OP-Z.

Trig in/out

Tempo Sync and trigger sounds on modular synths, like the pocket operator modular, by using Trig out. Trig in allows any track on OP-Z to be triggered by an external signal, such as a drum machine, to single step and advance the sequence.

PO out

Tempo Sync your Pocket Operators and other compatible gear and have them follow the tempo of the OP-Z.