DJ Equipment charts

Notes: As close to an industry standard as you can get. The archetypal DJ headphones: punchy, comfortable and durable. Firm favourites of countless DJs, for good reason.

Supplier's notes:
The Sennheiser HD 25 Headphones have been redesigned, featuring the iconic split headband with a single-sided connection cable and a flip-away earcup for convenient single-sided listening.

With a frequency response of 16Hz to 22kHz, an impedance of 70 ohms and a maximum SPL of 120dB, the HD 25 headphones are ideal for any monitoring application; whether broadcasting, live recording, in the DJ booth or just travelling from venue to venue.

Notes: The Ortofon Pro S is the most affordable stylus in the Concorde range, while maintaining the high quality of the series. It is ideal for entry-level DJs who want pro-quality performance. It is for use with Ortofon Concorde Pro S cartridge.

Notes: Classics for good reason. Easy setup, great sound and impressive durability from Ortofon's iconic Concorde design. Twin pack includes two cartridges and two Mix styluses, ideal for scratching or mixing.

Supplier notes:
The MIX is a general-purpose model for scratch and back-cueing

- Provides great performance and durability. It has a good quality spherical stylus, a solid cantilever, and serves general purposes well.
- It offers both reasonable output, high sound quality and a good tracking ability for virtually any style of music.
- With transparent sound across the spectrum and excellent handling ability, the MIX represents one of the longest running values in DJ cartridges.

Excellent price-to-performance ratio.

Notes: The Concorde DJ is considered the jack-of-all-trades, boasting accurate sound reproduction and excellent groove handling.

- The DJ is great for any style of music.
- It has a spherical stylus and an extremely balanced cantilever that provides outstanding rigidity.
- Not only does the cartridge have a most sufficient tracking ability, it also provides the DJs with the most needed stringency and very low record wear.

All in all: improved tracking, alongside of accurate sound reproduction and an excellent groove handling.

Notes: Replacement stylus - offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

- Larger, wider and more robust stylus body
- Easier to grip and handle
- Better fix by metal spring
- Tactile feedback of correct mount
- Large stylus viewing cut-out

Notes: The MIX is a general-purpose model for scratch and back-cueing

- Provides great performance and durability. It has a good quality spherical stylus, a solid cantilever, and serves general purposes well.
- It offers both reasonable output, high sound quality and a good tracking ability for virtually any style of music.
- With transparent sound across the spectrum and excellent handling ability, the MIX represents one of the longest running values in DJ cartridges.

Excellent price-to-performance ratio.

Notes: The best sound quality achievable for traditional vinyl playback.

The CLUB boasts the best specifications and best sound, making it an ideal choice for Club DJs in any environment: studio, broadcast or club.

- The CLUB features a Special-Elliptic stylus that allows for detailed sound quality: Special-Elliptic stylus fits better in the groove and therefore has more contact area with the groove itself, extracting more intricate details, than is possible with a spherical diamond.
- The CLUB's 8 mV output voltage requires less gain from the preamps, providing cleaner sound reproduction and less susceptibility to feedback in live environments.

The CLUB offers an outstanding platform for archival and sampling.

Notes: The Ortofon DJ S stylus is one of the most widely used Ortofon styli, with an excellent technical reputation. It provides moderate record wear and a good skip resistance, making it particularly suitable for scratching. It is for use with Ortofon Concorde DJ S cartridge.

Notes: Replacement stylus - offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

- Larger, wider and more robust stylus body
- Easier to grip and handle
- Better fix by metal spring
- Tactile feedback of correct mount
- Large stylus viewing cut-out

Notes: Simple but effective entry-level business from analogue mixer dons Allen & Heath. Innovative 2+2 channel design with three-band EQ and flexible filter section. Sound quality on a par with much more expensive options. Seriously hard to beat for the money.

Supplier notes:
Xone:23 is a 2+2 channel DJ mixer packed with pro features that would normally be found in the booth of a top-rated club, including an enhanced version of the legendary Xone filter with resonance control, VCA faders, 3 band total kill EQ, illuminated switches, crossfader curve selector and styling inspired by the flagship Xone:DB4.

At the heart of the mixer is the renowned analogue Voltage Control Filter (VCF) system offering Low-Pass and High-Pass filters, frequency sweep and 'mild to wild' resonance control. There is also an FX loop to connect to third party FX units, which route back in through the filter system.

The 2 stereo channels feature independent level controls for each input enabling up to four stereo sources to be simultaneously routed to the mix, as well as the dedicated send and return system for external FX.

The main mix output and mic input are on professional standard balanced XLR's, and there is a dedicated record output. The Xone:23 is equipped with comprehensive monitoring facilities, including a booth output with its own volume control, a cue mix control, and signal levels clearly displayed on the 9 segment peak hold meters.

Styled on the Xone:DB4, the Xone:23 includes soft touch, backlit controls, light-piped meters and a distinctive new shaped steel faceplate. The mixer can also be upgraded with the latest Innofader for enhanced scratch performance, available as an accessory.

Notes: The Ortofon OM Pro S is the world famous cartridge and is easy to set up, not to mention sounds great. It features a high 5mV output.

The Ortofon Om Pro S is a tough cartridge in the Ortofon OM format giving a small but high output cartridge for precision use. It is a great cart at a great price and fits into existing headshell.

Notes: The best sound quality achievable for traditional vinyl playback.

The CLUB boasts the best specifications and best sound, making it an ideal choice for Club DJs in any environment: studio, broadcast or club.

- The CLUB features a Special-Elliptic stylus that allows for detailed sound quality: Special-Elliptic stylus fits better in the groove and therefore has more contact area with the groove itself, extracting more intricate details, than is possible with a spherical diamond.
- The CLUB's 8 mV output voltage requires less gain from the preamps, providing cleaner sound reproduction and less susceptibility to feedback in live environments.

The CLUB offers an outstanding platform for archival and sampling.

Notes: The Kyowa Stanton 500AL is suitable for replacement for Stanton D5100AL, D5100AL Mk2, D5107AL, D5107AA styluses. Fits Stanton cartridges 500A, 500AA, 500AL, 500AL Mk2, 500E, 505SK, 505SK2, 520SK.

Notes: Tonar DJ Competition N44-7 replacement stylus with red fluor dot for the Shure M44-7 cartridge.

Needle pressure of 3.5 - 4.5 gram
For cartridge type: MM
Tracking Force Range: 1.5 - 3 g
Diamond needle Sperical 0.7 mil

Notes: Replacement stylus - offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

- Larger, wider and more robust stylus body
- Easier to grip and handle
- Better fix by metal spring
- Tactile feedback of correct mount
- Large stylus viewing cut-out

Notes: DJ-specific version of AIAIAI's modular TMA-2 XE headphones, featuring 40mm S01 drivers, slim H01 headband, on-ear PU leather E02 earpieces and straight 1.5m C05 cable. Quality sound with loud, punchy response and eco-friendly credentials.

Supplier's Notes:
Modular DJ headphones.

Balanced sound
Clear sound at high volume levels
High sound isolation
Weighing only 168g
Modular headphone design

Modular DJ headphones with balanced sound for DJ performance and music exploration.

Signature bio-diaphragm drivers engineered to deliver high volume levels and minimise distortion when performing in loud environments. Weighing only 168g for enhanced comfort over extended periods of time.

Balanced sound; punchy bass

Critically acclaimed sound specifically designed for live performance. Punchy bass and balanced sound for DJ performance and music exploration.

The speaker unit contains a bio-cellulose diaphragm made from bacterial cellulose, an organic compound grown using certain types of bacteria. The precision-grown diaphragm from bio-cellulose is stiffer, lighter, and stronger than regular PET speaker units, allowing the sound-producing diaphragm to vibrate without the levels of distortion found in other speakers.

Each of these qualities results in more accurate and detailed sound from the speaker with the ability to retain clarity of sound at high volumes.

Lightweight & durable

Put to the test and trusted in the most vigorous environments - on the road, in the studio, and on stage. This requires the highest standards and zero compromise.

Modular product design

With interchangeable components such as earpads, cables, and speaker units, you can upgrade or change parts of your headphones to improve sound quality, comfort and style.

Weighing only 168g

Slim headband design made from high grade nylon covered in neoprene, results in a total headphone weight of only 168g.

High grade materials

Speaker units made from 30% recycled plastics and diaphragms made from bio-cellulose. Ear-cushions made from soft and resilient vegan leather.

The TMA-2 DJ XE comes with a number of specific features suitable for live DJing.

Cable lock

Make sure the cable are not pulled out while playing by locking it to the speaker unit.

Adjustable cups

Change the position of the speaker units for the perfect headphone fit.

Angled stereo plug

Reduce the risk of pulling the plug from the mixer, and less intrusive cable when you are beat mixing.

Stereo jack adapter

Change from a stereo mini jack (3.5 mm) to a larger stereo jack (6.3 mm) with the adaptor.

In the box

S01 . Balanced sound - Bio-diaphragm

Engineered with a 40mm speaker diaphragm made from stiff bio-cellulose to reduce distortion and increase transparency. Tuned for a balanced, accurate sound. Balanced sound - Bio-diaphragm.

H01 . Slim - PU foam

Slim and lightweight polycarbonate headband with soft, durable PU foam padding.

E02 . On ear - PU leather

Soft on-ear memory foam cushions covered with PU leather. The thickness and materials gives high isolation and a punchy sound. Strong bass and low end dynamics.

C05 . Straight - 1.5m - Adapter

Straight black 1.5m thermo plastic cable with soft touch surface. Comes with 1/4 to 1/8 screw-on adapter.

As a music creator, you need headphones that can keep up with your evolving needs and styles. These TMA-2 modular headphone system offers a customizable solution that adapts to your creative process. With interchangeable components such as earpads, cables, and drivers, you can upgrade or change parts of your headphones to improve sound quality, comfort, or style.

By investing in this modular headphone system, you're not just buying headphones - you're investing in a long-term solution that evolves with your music. This reduces electronic waste while ensuring that you always have the optimal headphones just for you.

Diaphragm: Bio-cellulose
Driver diameter: 40 mm
Impedance: 32 Ohm
Magnet: High-grade Neodymium
Max power: 100 mW
Rated power: 40 mW
Resonance freq: 80 Hz

Notes: Styli protection caps for Concorde MkII cartridges and styli.

Notes: Ultra-low-budget DJ headphones with the look and feel of pro models. Rotating earpieces, closed back design and punchy sound give you DJ-style features at a low price.

Supplier's Notes:
One place a DJ cannot compromise, is in how they hear their mix. The Numark HF-125 headphones set delivers the goods with flexible 7-position independently adjustable dual ear cups, large 40mm Mylar speaker drivers, 6" tangle-resistant cord with 1/4" connector, and padded headband and ear cups.

Notes: Hotly anticipated rotary goodness from Spanish pro audio specialists Ecler. Simple, pure two-channel design with three-band channel EQs, three-band isolator and quality sound.

Supplier's Notes:
Two-Channel Analogue Rotary Mixer

WARM2 is a professional two-channel analogue rotary DJ mixer, designed and manufactured by ECLER in Barcelona. Featuring two phono/line channels and a micro/line channel, classic sharp filters, a 4th order Isolator and a narrow portable format, it will deliver a warm and crystal clear analogue sound.

Audio Performances

Inputs Sensitivity nom/Impedance:

LINE : 0dBV/50kO
PHONO : -40dBV/50kO
MICRO : -50dBV/>1kO
FX RETURN : 0dBV/>6kO

Outputs Level/Minimum Load:

HOUSE (BAL) : 0dBV/600O 1V *(+12dB 4V)
HOUSE (UNBAL) : 0dBV/2.2kO 1V *(+12dB 4V)
BOOTH (UNBAL) : 0dBV/2.2kO 1V *(+12dB 4V)
REC : 0dBV/10kO
HEADPHONES : 200mO/200O THD 1%
FX SEND : 0dBV/2.2kO

Frequency Response:

LINE : 10Hz#30kHz -1dB
MICRO : 10Hz#25kHz -1dB
PHONO : RIAA i0.5dB
FX RETURN : 10Hz#50kHz -1dB

THD-N:

LINE : <0.006%
MICRO : <0.9%
PHONO : <0.08%
FX RETURN : <0.005%

CM MR:

MICRO: >70dB @ 1kHz

Signal Noise Ratio:

LINE: >99dB
MICRO: >85dB
PHONO: >98dB
FX RETURN: >100dB

Max Undistorted Output Level:

HOUSE (Electr.BAL): 21dBV (23dBu)
HOUSE (UNBAL): 21dBV (23dBu)
BOOTH (UNBAL): 21dBV (23dBu)

Trim control:

INPUTS 1-2: - 15dB
INPUT 3: - 20dB

Tone control Inputs 1-2:

BASS: +10/-30dB
MID: +10/-25dB
TREBLE: +10/-30dB


Tone control Isolator:

BASS: +12/-70dB
MID: +12/-40dB
TREBLE: +12/-70dB

Tone Filter cut frequency at -6dB (slope 12dB/oct):

BASS: 200Hz
MID: 200Hz#6.8kHz
TREBLE: 6.8kHz

Isolator cut frequency at -6dB (slope 24dB/oct):

BASS: 300Hz
MID: 300Hz#4kHz
TREBLE: 4kHz

Connectors

Inputs:

LINE 1-2-3: RCA STEREO
PHONO 1-2: RCA STEREO
MICRO 3: 6.3mm TRS BAL. JACK
FX RETURN: RCA STEREO

Outputs:

HOUSE (BAL): XLR STEREO
HOUSE (UNBAL): RCA STEREO
BOOTH: RCA STEREO
FX SEND: RCA STEREO
REC: RCA STEREO
HEADPHONES: 6.3mm/3.5mm STEREO JACK

Miscellaneous

Control Mode: Rotary with Alps Blue Velvet Potentiometers
Phantom Voltage: 18VDC/5mA Max (Default ON)
MIX and PFL VU-Meter: LED 12 segments (-30dBV # +20dBV)

Operation

Operation Temperature: -5-C - 45-C / 23-F - 113-F
Humidity: 20 - 90% RH (no condensation)

Supply

Mains voltage: 90-264VAC 47-63Hz
Rated power consumption: 30VA

Mechanical

Dimensions (without wooden sides): 400 x 185 x 100mm / 15.7" x 7.2" x 3.9"
Weight : 3.6Kg / 7.94 lbs

Notes: Updated version of Audio-Technica's excellent entry-level DJ turntable, featuring an improved direct-drive motor. Built-in phono preamp and USB audio interface make it easy to connect to any amplifier, powered speakers or computer.

Supplier's Notes:
AT-LP120XUSB Direct-Drive Fully Manual Turntable

This update of the AT-LP120-USB turntable features a new DC servo direct-drive motor, along with adjustable dynamic anti-skate control and selectable phono preamplifier. The fully manual turntable plays 33-1/3, 45, and 78 RPM records and is equipped with a USB output that allows direct connection to your computer. Just download the free Mac- and PC-compatible Audacity recording software (or software of your choice) and start converting your records to digital audio files.

But in addition to the USB output, the turntable also comes with a detachable dual RCA output cable and is equipped with a built-in selectable phono preamp so you can connect directly to your home stereo, whether it has a dedicated phono input or not. The turntable features an S-shaped tonearm with adjustable tracking force and an AT-HS6 universal 1/2"-mount headshell with an AT-VM95E Dual Magnet phono cartridge.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application. Additional features include a die-cast aluminium platter with felt mat; a start/stop button; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8% or +/-16% adjustment ranges; a stroboscopic platter with speed indicator; a removable plug-type stylus target light; external power supply; and a removable hinged dust cover.

Analogue or USB Connection

Next-Generation Analogue/USB Turntable

An update of the critically acclaimed AT-LP120-USB, this turntable features a new DC servo direct-drive motor, along with adjustable dynamic anti-skate control and selectable phono preamplifier.

Plays 33-1/3 RPM, 45 RPM and 78 RPM Records

USB and Analogue Output

Built-in Switchable Phono Pre-Amplifier

AT-VM95E Dual Magnet Phono Cartridge

Taking Your Vinyl to the Next Level

High-Fidelity Home Audio

Whether using with your home stereo system or your computer, the AT-LP120XUSB's professional controls give you the power to shape your high-fidelity listening experience.

Cartridge Assembly Line Circa 1962

Half a Century of Stunning Analogue Sound

Audio Technica was started in Tokyo in 1962, designing and manufacturing high-performance phono cartridges. That half-century's worth of analogue expertise goes into every turntable produced, ensuring you get the best listening experience from your vinyl.

Specifications

Turntable

Type: 3-speed, fully manual operation
Motor: DC servo motor
Drive Method: Direct drive
Speeds: 33-1/3 RPM, 45 RPM, 78 RPM
Turntable Platter: Die-cast aluminum
Starting Torque: >1.0 kgf.cm
Braking System: Electronic brake
Wow and Flutter: <0.2% (WTD) @ 3 kHz (JIS)
Signal-to-Noise Ratio: >50 dB
Output Level: Pre-amp "PHONO": 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp "LINE": 240 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized
USB Function: A/D, D/A - 16-bit/44.1 kHz or 48 kHz USB selectable;
Computer interface: USB 1.1 Compliant Windows 7 or above, or MAC OS X or above
Power Supply Requirements: 100 to 240 V, 50/60 Hz, 1.5A Max.
Dimensions: 452.0 mm (17.80") W x 352.0 mm (13.86") D x 141.6 mm (5.57") H
Weight: 8 kg (17.6 lbs.), without dust cover
Accessories Included: AT-VM95E phono cartridge; AT-HS6 headshell; 1.9 m (6.2') USB cable; dual RCA (male) to dual RCA (male) cable with ground wire; counterweight; felt mat; dust cover; 45 RPM adapter; plug-type stylus target light

Notes: The Concorde Scratch allows turntablist and scratching DJs to achieve new levels of performance with an unprecedented tracking ability and extra high output.

- The SCRATCH is intended especially for scratching and back-cueing. The SCRATCH uses spherical styli, as they preserve more of the groove over back-cueing and scratching.
- For DJs that require increased tracking ability, the SCRATCH is up to the task. The Scratch has a supreme ability to trace the grooves of the records and it is tailored specifically for scratch.
- Due to its very high output 10 mV, it is perfect for scratch of all music with deep bass frequencies. With solid bass reproduction and extended highs, the SCRATCH is great for any style, providing energetic sound. Maximum scratch performance guaranteed!

Notes: The legend is back. Updated and re-engineered for the 21st century, the classic Technics DJ turntable remains the industry standard. Top sound, top build quality.

Supplier notes:
The SL-1210MK7 is the newest model of the SL-1210 Series. For the development of this model, all that modern-day DJs need and want was reviewed from the ground up. At the drive section of the MK7 is a coreless direct drive motor. While achieving both stable rotation and powerful torque, this has successfully eliminated a rotation irregularity called cogging, which was the only drawback of the direct drive system. As a result, sound quality was further improved. The pitch control incorporates digital control to achieve improved tracking performance and accuracy. The buttons and tonearm are black to complete the all black design, and the LED light can be set to illuminate in red or blue. A reverse play function has been added to expand the breadth of DJ play style. With those features and functions, the MK7 aims to set a new standard for DJ turntables.

Notes: Tonar replacement needle/stylus for Shure M-44-7. Diamond tip.

Notes: The Concorde DJ is considered the jack-of-all-trades, boasting accurate sound reproduction and excellent groove handling.

- The DJ is great for any style of music.
- It has a spherical stylus and an extremely balanced cantilever that provides outstanding rigidity.
- Not only does the cartridge have a most sufficient tracking ability, it also provides the DJs with the most needed stringency and very low record wear.

All in all: improved tracking, alongside of accurate sound reproduction and an excellent groove handling.

Notes: Black version of Audio-Technica's entry-level DJ turntable, updated to feature an improved direct-drive motor. Built-in phono preamp and USB audio interface make it easy to connect to any mixer, powered speakers or computer.

Supplier's Notes:
AT-LP120XUSB Direct-Drive Fully Manual Turntable

This update of the AT-LP120-USB turntable features a new DC servo direct-drive motor, along with adjustable dynamic anti-skate control and selectable phono preamplifier. The fully manual turntable plays 33-1/3, 45, and 78 RPM records and is equipped with a USB output that allows direct connection to your computer. Just download the free Mac- and PC-compatible Audacity recording software (or software of your choice) and start converting your records to digital audio files.

But in addition to the USB output, the turntable also comes with a detachable dual RCA output cable and is equipped with a built-in selectable phono preamp so you can connect directly to your home stereo, whether it has a dedicated phono input or not. The turntable features an S-shaped tonearm with adjustable tracking force and an AT-HS6 universal 1/2"-mount headshell with an AT-VM95E Dual Magnet phono cartridge.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application. Additional features include a die-cast aluminium platter with felt mat; a start/stop button; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8% or +/-16% adjustment ranges; a stroboscopic platter with speed indicator; a removable plug-type stylus target light; external power supply; and a removable hinged dust cover.

Analogue or USB Connection

Next-Generation Analogue/USB Turntable

An update of the critically acclaimed AT-LP120-USB, this turntable features a new DC servo direct-drive motor, along with adjustable dynamic anti-skate control and selectable phono preamplifier.

Plays 33-1/3 RPM, 45 RPM and 78 RPM Records

USB and Analogue Output

Built-in Switchable Phono Pre-Amplifier

AT-VM95E Dual Magnet Phono Cartridge

Taking Your Vinyl to the Next Level

High-Fidelity Home Audio

Whether using with your home stereo system or your computer, the AT-LP120XUSB's professional controls give you the power to shape your high-fidelity listening experience.

Cartridge Assembly Line Circa 1962

Half a Century of Stunning Analogue Sound

Audio Technica was started in Tokyo in 1962, designing and manufacturing high-performance phono cartridges. That half-century's worth of analogue expertise goes into every turntable produced, ensuring you get the best listening experience from your vinyl.

Specifications

Turntable

Type: 3-speed, fully manual operation
Motor: DC servo motor
Drive Method: Direct drive
Speeds: 33-1/3 RPM, 45 RPM, 78 RPM
Turntable Platter: Die-cast aluminum
Starting Torque: >1.0 kgf.cm
Braking System: Electronic brake
Wow and Flutter: <0.2% (WTD) @ 3 kHz (JIS)
Signal-to-Noise Ratio: >50 dB
Output Level: Pre-amp "PHONO": 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp "LINE": 240 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized
USB Function: A/D, D/A - 16-bit/44.1 kHz or 48 kHz USB selectable;
Computer interface: USB 1.1 Compliant Windows 7 or above, or MAC OS X or above
Power Supply Requirements: 100 to 240 V, 50/60 Hz, 1.5A Max.
Dimensions: 452.0 mm (17.80") W x 352.0 mm (13.86") D x 141.6 mm (5.57") H
Weight: 8 kg (17.6 lbs.), without dust cover
Accessories Included: AT-VM95E phono cartridge; AT-HS6 headshell; 1.9 m (6.2') USB cable; dual RCA (male) to dual RCA (male) cable with ground wire; counterweight; felt mat; dust cover; 45 RPM adapter; plug-type stylus target light

Notes: Great performance and durability as to basic scratch and back-cueing is what the Pro is known for.

It has a good quality spherical stylus, a rock-solid cantilever, and serves general purposes well.

The Pro is the logical alternative to the more expensive expert carts. It offers both reasonable output and high sound quality which is, in fact, all there is needed to entertain an audience.

The Pro Series of cartridges provides a great balance of sound quality with tracking ability, for virtually any style of music. With flat, transparent sound across the spectrum and excellent handling ability, the Pro Series represents one of the longest running values in DJ cartridges.

Ideal choice for talented, but less experienced DJs!

Pro Stylus Technical Data
Output voltage at 1000Hz, 5cm/sec. - 5 mV
Channel balance at 1kHz - 1,5 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency response - 20-20.000 Hz +3/-2 dB
Tracking ability at 315 Hz at recommended tracking force - 70 um
Compliance, dynamic lateral - 7 um/m N
Stylus type - Spherical
Stylus tip radius - R 18 um

Tracking force range - 3.0-5.0 g (30-50 mN)
Tracking force recommended - 4.0 g (40 mN)
Tracking angle - 20-
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde/OM cartridge weight - 18.5 / 5.0 g

Compatible with cartridges - Pro

Notes: Tonar 6364DS replacement stylus for Stanton N-500 and 500-V3 cartridges.

Notes: DJ-friendly version of AIAIAI's excellent modular headphones. Configured here with punchy S02 drivers, on-ear PU leather earpads and coiled cable.

Supplier's notes:
TMA-2 DJ has been put to the test on stages all over the world. With its reinforced headband and powerful bass, it's a specialized piece of equipment for the hardworking musician.


The titanium-coated S02 speaker unit delivers a punchy and intense sound representation focused on bass and low-end dynamics. Combining the durable H02 nylon headband and the E02 on-ear PU leather earpads providing high isolation results in a powerful sturdy headphone suitable for live performance and electronic/bass heavy music.



In the Box.

S02 Speaker unit: Punchy.

E02 Earpads: PU leather, on-ear.

H02 Headband: Nylon, Silicone padding

C02 Cable: Coiled w/adaptor, black, 4 mm, 1.5 m.



Technical Specifications.

Driver diameter: 40 mm

SPL: 117 dB

Resonance frequency: 90 Hz

Impedance: 32 Ohm

Rated power: 30 mW

Max power: 70 mW

Diaphragm material: Titanium Coated

Magnet type: Neodymium

Notes: The best value rotary mixer on the market. Entry-level rotary option from German brand Omnitronic offers similar features and sound to boutique mixers three or four times the price.

Supplier notes:
The TRM-202 MK3 by Omnitronic with its classic ALPS potentiometers (Blue Velvet RK27) and the integrated 3-band frequency isolator offers the classic features of a rotary mixer.

Due to its high quality components, the sound pattern is good and appealing. The large potentiometers of both input channels allow very smooth transitions, hardly realizable with a conventional mixer. Both input channels can be switched between line and phono. A microphone input is also at hand. The kill characteristic provides a total erasure of basses, mids and highs and so enables creative mixing. Due to its booth output and a separate volume control, the TRM-202 MK3 can also be used in clubs without a problem. Thanks to the record output, it is also possible to record own's DJ set.

Notes: The entry level Concorde Black boasts low vinyl wearout characteristics and a spherical stylus, while especially good sound characteristics emphasise its quality as a good all rounder.

Notes: Concorde DIGITAL is designed to extend the life of timecode vinyl and minimize errors in decoding.

- At the same time DIGITAL provides optimal output voltage and sound quality for use with conventional vinyl.
- This optimized 10 mV output voltage maximizes the signal-to-noise ratio of the audio being fed to the software, which results in better interpretation of the timecode signal.
- Furthermore, a decrease in the reproduction of frequencies where vinyl wear & crackle occur helps to minimize errors in the interpretation of the timecode signal and helps timecoded vinyl records last longer.

Notes: Bluetooth-equipped version of Audio-Technica's excellent LP120 turntable. Built-in USB connection allows you to hook directly up to a PC for recording vinyl. Great value.

Supplier's Notes:
This version of Audio Technica's critically-acclaimed AT-LP120X USB, now features full wireless Bluetoothr 5.0 connectivity, allowing you to enjoy your favourite vinyl records on the latest Bluetoothr speakers and wireless headphone technology.

The LP120XBT-USB can be plugged into PC, Linux or Mac allowing you to record and convert your vinyl collection to digital tracks, while the fully manual tonearm puts you in control, allowing you to position and set playback wherever you like.

Taking Your Vinyl to the Next Level

Crystal Clear Bluetooth Wireless Audio

Compatible with most Bluetoothr speakers and headphones, the LP120XBT-USB pairs seamlessly to your devices. Simply press the Bluetoothr button, located next to the tonearm, for 4 seconds and connect to your chosen speakers, it's that simple.

You can also connect to Bluetoothr wireless headphones, giving you the flexibility to enjoy your vinyl records without the clutter of wires or having to be near your turntable and music setup. Sink into your comfiest chair and wirelessly enjoy over half a century of Japanese audio engineering and sound excellence.

Bluetooth 5.0 Technology

USB and Analogue Output

Plays 33-1/3 RPM, 45 RPM and 78 RPM Records

AT-VM95E Dual Magnet Phono Cartridge

Multiple Connectivity Options

Plug and Play

The LP120XBT-USB is designed to give you a high-quality listening experience that's easy to enjoy right out of the box. A built-in preamp means the LP120XBT-USB can be plugged directly into your existing speakers, or, with the simple press of a switch, connect wirelessly via Bluetoothr 5.0 to any Bluetooth-compatible speaker, supported home assistant or wireless headphones. Space saving with no external amps, no clutter and no mess; just incredible sound and reliable features designed with over half a century of Japanese audio innovation.

The LP120XBT-USB can also be plugged directly into your computer, for audio playback via your PC speakers or for simple and easy backup and transfer of your vinyl records to playback on your smart devices when on-the-go.

Over 55 Years of Analogue Excellence

Iconic Sound Loved The World Over

The LP120XBT-USB and LP120XUSB line are some of the best-selling turntables around the world, with over 2,500 5-star reviews on Amazon and consistently high feedback from beginners, music lovers, professionals and audiophiles. Audio Technica designed the LP120XBT-USB with you in mind, eliminating the need for expensive amps or convoluted speaker setups.

Based on the iconic DJ turntables and almost 60 years of Japanese audio innovation, the LP120XBT-USB lets you plug directly into your favourite speakers, or enjoy your vinyl collection wirelessly via Bluetoothr to your smart speakers or wireless and truly wireless headphones.

Specifications

Turntable
Type: 3-speed, fully manual operation
Motor: DC servo motor
Drive Method: Direct drive
Speeds: 33-1/3 RPM, 45 RPM, 78 RPM
Turntable Platter: Die-cast aluminum

Notes: - Replacement or spare needle for M44-7 cartridge
- Ultra-high stability
- Designed not to skip under demanding circumstances
- Designed to match the original
- Ultra low record wear

Notes: A popular replacement stylus. Individually packed in a plastic case. Made in Japan.

Colour: White
Product Dimensions (mm): 11x20x10
Net weight (kg): 0.01
Gross Weight (kg): 0.013
Packaged dimensions (HxWxL mm): 20x50x20
Gross Weight (Packaged) (kg) : 0.013

Notes: Outstanding DJ turntable, designed to bridge the gap between vinyl and Serato. Solid analogue turntable underneath, embellished with digital features like pads, performance modes and an LCD screen for track info.

Supplier's notes:
This turntable is designed for a seamless integration with Serato DJ Pro, offering the possibility of controlling up to 7 different performance modes via the pad section. And thanks to the unique Platter Play mode, the pads can be used to control the platter's rotation speed to create melodies and authentic musical performances. The RP-8000 MK2 represents the perfect balance of a first-class professional turntable and an innovative musical instrument.

Real Time LC Display:
Besides all creative improvements, the RP-8000 MK2 has everything a DJ turntable should be equipped with. A digital LC display shows information regarding pitch, BPM, deck assignment, scales and notes, elapsed/remaining time of current track, as well as firmware settings. In Serato DJ Pro, it is possible, for example, to show the current BPM value of a track, in order to exactly match your tracks without the need to look at your computer monitor.

Pad section with 7 New Performance Modes:
Developed for application with Serato DJ Pro, and thanks to the seamless plug-and-play integration, the RP-8000 MK2 in a DVS setup offers unparalleled creative possibilities. The 8 large pads with RGB illumination can control over 7 different performance modes (Cue, Sampler, Saved Loops, Pitch Play, Loop, Loop Roll, Slicer), as well as 2 user modes, which can be custom assigned with individual preferred functions. Furthermore, by using the multi encoder it is possible to browse tracks directly from the turntable unit itself, and load them instantly to the respective deck. Thanks to its MIDI compatibility, the RP-8000 MK2 can communicate with every MIDI compatible DJ software - this way, an additional controller for performance modes is not necessary.

Balanced S-Shaped Tone Arm with Upgraded Tone Arm Base:
The RP-8000 MK2 features a statically balanced S-shaped tone arm with hydraulic lift and anti-skating mechanism. The newly developed tone arm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tone arm comes with a universal connection for pick-up cartridge systems (SME).

Platter Play - Creative Platter Pitch Control:
Platter Play mode allows users to control the platter's pitch via the performance pads, opening up new possibilities for musical live performances and turning the RP-8000 MK2 into a legitimate musical instrument. A total of 22 scales and 34 notes are at your disposal with an option to create up to 9 user-defined scales. The two speed select buttons can be used for pitch bending in Platter Play mode and also to respectively increase or decrease the audio material's pitch in steps of one half-tone. Furthermore, the platter's speed can also be controlled via an external MIDI keyboard.

High-Resolution Pitch Section with Digital Fader:
By using the high-resolution pitch fader, you can adjust the platter speed in the classic turntable pitch range +/-8%. The RP-8000 MK2 is also cable of a wider, DJ-friendly +/- 16% pitch range and a massive +/-50% ultra-pitch, allowing for increased creativity when manipulating and mixing records. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).

Powerful Motor with Extensive Adjustment Possibilities:
The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. This makes the RP-8000 MK2 an extremely smooth running turntable. Also, the turntable break speed (platter stop) can be adjusted from 0.2 - 6 seconds and the precision-machined, heavy die-cast aluminium platter is lined with vibration-reducing rubber to eliminate unwanted vibrations and resonance.

Sturdy Casing Construction:
By using a combination of metal, rubber and synthetic materials, the RP-8000 MK2's housing is more reinforced and heavier than ever before. This results in a turntable that is extremely resistant to vibrations caused by heavy bass sounds, and its shock-absorbing feet help to further improve this isolation. The surface is coated with a scratch-resistant high-quality deep black metallic finish.

High-Quality Connections and Integrated Phono Pre-Amp:
Thanks to the recessed rear connection panel, the RP-8000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. Due to the additional output, the turntable can be connected to 2 mixers simultaneously, also allowing an easy switch from DVS to vinyl. An optional ground terminal offers additional protection in club environments. All cable connections (RCA/mains) are detachable and easy to exchange, which also helps with transport and storage.

Notes: Alternative stylus for Shure Whitelabel. Fits perfectly and plays perfectly. Diamond stereo needle tip.

Notes: Replacement stylus for Ortofon OM/Concorde DJ series (eliptical).

Notes: Killer value from DJ brand Reloop. Classic SL1200-inspired design with solid build quality, accurate sound reproduction plus modern features like a 50% pitch option and reverse button.

Supplier's notes:
With the RP-7000 MK2, Reloop has built a turntable that caters to the high demands of professional DJs and modern nightclubs. With its powerful direct drive motor and rugged construction we were able to develop a sturdy and indestructible turntable that can take on harsh everyday life with ease.

Sturdy Casing Construction:

By using a combination of metal, rubber and synthetic materials, the RP-7000 MK2's housing is more reinforced and heavy than ever before. This results in a turntable that is extremely resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality deep black or classic silver metallic finish.

Balanced S-Shaped Tone Arm with Upgraded Tone Arm Base:

The RP-7000 MK2 features a statically balanced S-shaped tone arm with hydraulic lift and anti-skating mechanism. The newly developed tone arm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tone arm comes with a universal connection for pick-up cartridge systems (SME).

Dual Start/Stop Buttons, Precise Motor Control and Reverse Function:

As well as the above technical innovations, the RP-7000 MK2 is equipped with a few functions that will make any DJ's life much easier. The newly developed aluminium LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has also been integrated to facilitate a vertical setup (battle position) and by using the buttons on the RP-7000 MK2's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.

High-Resolution Pitch Section with Digital Fader:

Using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range +/-8%. However, the RP-7000 MK2 is also cable of a wider, DJ-friendly +/- 16% pitch range and a massive +/-50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).

High-Quality Connections and Integrated Phono Pre-Amp:

Thanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals. An optional ground terminal offers additional protection in club environments. All cable connections (RCA/mains) are detachable and easy to exchange, which also helps with transport and storage.

Powerful Motor with Extensive Adjustment Possibilities:

The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. This makes it an extremely smooth running turntable with wow and flutter of just 0.01% WRMS*. Furthermore, the turntable break speed (platter stop) can be adjusted from 0.2 - 6 seconds and the precision-machined, heavy die-cast aluminium platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.

Notes: A stylus that meets the high demands of DJs.

The special heavy-duty suspension of the headshell and the spherical diamond guarantee reliable tracking. An integrated weight ring creates heaviness thus allowing high bearing strength.

The design allows easy installation on all drives with SME-Disco Connection: Tighten the plug in screw cap on the tone arm, adjust contact pressure and even the professional record no bounds are set.

Notes: The Tonar Banana stylus is designed for top performance of Tonar Banana DJ cartridge. Always keep a spare to be on top of your style and music.

Notes: Great value turntable from one of the most innovative brands in DJ tech. Classic Technics-style design updated with nice modern features like adjustable pitch range and reverse function.

Supplier's notes:
The RP-4000 MK2 is a solid DJ turntable for advanced users. The new MK2 version comes with several improvements, including a newly developed top panel and reworked metallic buttons with enhanced feel as well as a variety of functions.

The precision-engineered die-cast platter is accelerated by a powerful motor with a high-torque direct drive of more than 1.8 kg/cm. The precise motor control with 3 speeds (33 1/3, 45 & 78 rpm) allows for the RP-4000 MK2 to play back any record. The pitch section with a selectable range of +/-8% and +/-16%, respectively, is suitable for the finest pitch adjustments.

The RP-4000 MK2 features a statically balanced s-shaped tone arm with hydraulic lift and anti-skating mechanism. Via the universal connection for pick-up systems (SME) a large number of pick-up systems can be connected.

The new deep black metallic top panel construction is equipped with metallic buttons for start/stop, platter speed, pitch control, reverse function and tempo reset. The improved touch upon hit offers a clear haptic feedback. The sturdy construction with optimized damping features and shock-absorbing feet improve isolation from unwanted vibrations.

Notes: Even before the launch of the Concorde MkII, Ortofon have always studied the feedback of their customers and how they utilize their products.

Skilled DJs demand specialized tools that can help them push their creativity to the edge - consistently testing the boundaries in the realm of performance.

Understanding this and reflecting Ortofon's extensive experience in industrial design and technological know-how, Ortofon bring you the new Ortofon VNL cartridge - a model tailored uniquely to the unrelenting demands of modern turntablists and portablists.

This cartridge comes with the VNL II stylus (dynamic lateral 15 um/m N, rigid). These other styli are also available to order:

VNL I compliance, dynamic lateral 16 um/m N - Flexible

VNL III compliance, dynamic lateral 14 um/m N - Firm

DJs can easily identify which stylus type best suits their individual DJ style and enables their absolute best performance capability.

VNL technical data

Stylus Type: Spherical
Tracking Force: 4.0 g
Output Voltage: 6 mV
Frequency Range: 20-20.000 Hz
Stylus Type: Spherical
Tracking Force: 4.0 g
Output Voltage: 6 mV

Frequency Range 20-20.000 Hz
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel separation at 1kHz - 20 dB
Frequency response 20 Hz - 20 kHz -2/+4 dB

Tracking ability at 315 Hz at recommmended tracking force:
VNL II: 90 um

Compliance, dynamic lateral:
VNL II: 15 um/m N

Tracking force range - 3 - 5 g
Tracking force recommended - 4 g
Antiskating - for best backcueing performance use "0"
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 6,5 g
Replacement stylus units: VNL I, VNL II, VNL III

Notes: Replacement stylus for the CC-1 Cartridge.

Sold individually.

Notes: Tonar replacement needle/stylus for Shure N-44-G. Diamond tip.

Notes: Replacement stylus - offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

- Larger, wider and more robust stylus body
- Easier to grip and handle
- Better fix by metal spring
- Tactile feedback of correct mount
- Large stylus viewing cut-out

Notes: One of our favourite DJ turntables. Clearly inspired by the classic Technics SL-1200 but clocking in at a more affordable price point. Direct drive motor, decent build quality and a few nice bonus features like adjustable pitch range.

Supplier notes:
The AT-LP140XP fully manual professional DJ turntable features a high-torque direct-drive motor and anti-resonant, mass-damped, die-cast aluminium platter to ensure stable, on-axis rotation at 33-1/3, 45, and 78 RPM. It is equipped with an S-shaped tonearm with height adjustment, adjustable tracking force (counterweight) and adjustable dynamic anti-skate control.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the durable, high-output AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus included with the turntable. It comes pre-mounted to an AT-HS6 universal 1/2"-mount headshell.

Designed to connect to components with a dedicated phono input, the turntable comes with a detachable dual RCA output cable and supplies a strong 5.5 mV output.

Additional professional features include a start/stop button; forward and reverse play; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8%, +/-16%, and +/-24% adjustment ranges; a stroboscopic platter with speed indicator; a retractable plug-type stylus target light; and a removable hinged dust cover.

Notes: This Cartridge is a result of a competent design alliance between technical experts and the world famous DJ QBert who knows exactly what to expect and demand of the ideal gear. The QBert has a supreme ability to trace the grooves of your records and it is tailored specifically for scratch. Due to its enormous output, it is perfect for scratch of all music genres with deep bass frequencies.

Ortofon Qbert Stylus is the ultimate scratch stylus, to be used with either Concorde or OM Series Cartridges. Ortofon QBert Stylus is a high quality stylus used by DJs wordwide.

Notes: Replacement stylus - offers a tactile feedback when seating, indicating a snug and secure fit, while a cut-out area in the front allows for far more accurate needle drops.

- Larger, wider and more robust stylus body
- Easier to grip and handle
- Better fix by metal spring
- Tactile feedback of correct mount
- Large stylus viewing cut-out

Notes: Numark Scratch is a 24-bit two-channel mixer that redefines what you can do with an affordable 2-channel scratch mixer. With Scratch, you'll be able to create and perform at a higher level than you ever thought was possible - especially with a mixer in the affordable price category. Scratch combines professional-level performance and outright DJing fun in a way nothing else ever has. You've got to experience it to really see what it's all about!

Scratch is really something special - It brings a new look and design to the mixer category. It boasts an all-metal build with professional features such as a built-in Innofader crossfader, performance pads, instant loop encoder, and toggle paddles to trigger software-based effects. To top it off, it comes with Serato DJ Pro and Scratch is Serato DVS ready.

Its soft responsive performance pads give you the freedom to access cues, rolls, and sampler quickly. The pad mode makes it very convenient to set hot cue points, roll temporary loops, and trigger samples at ease.

Six dedicated software-based FX to apply to individual channel or both using the premium performance base toggle paddles. You can adjust your FX mix from Dry to Wet as you feel the mix.

Play your best with the best! With amazing sound quality thanks to its 24-bit circuitry, the sound is pristine. Your digital song collection never sounded so good, whether you're using Serato DJ Pro or other preferred software. This is also a great mixer to play vinyl records, with a full EQ and a dedicated low/high pass filter.

The butter-smooth Innofader crossfader is designed with the turntablist in mind to perform most intricate and accurate scratches. You have two switches above the crossfader; 1.) reverse the channels and the other 2.) change the slope for a hard cut or a soft curve for mixing.

Easily connect to the Numark Scratch, whether you use traditional turntables or media players. Scratch unlocks Serato DVS for Serato DJ Pro instantly.

Looping made easy. Keep the beat going by pressing the encoder down, and it will lop to the default parameters set in your software. Turn the knob to the right to extend the beat and to the left to shorten the loop.

Scratch has all the necessities with premium features for any setup. There is an XLR main output and unbalanced booth output for the best booth/dance floor experience. There are unbalanced inputs for both line and phono inputs for each channel. A microphone/auxiliary input for XLR or 1/4-inch TS controlled by the mic level knob on the mixer gives you all the versatility you could ask for.

Power supply:
Internal 100v - 240v

Dimensions
12.05" (L) x 9.61" (W) x 3.32" (H)

Notes: Replacement stylus for Reloop Concorde Black